Edimax Technology EW-7205AP Parameters Description Auto Rate Fall Back, Wireless Channel, WEP key

Wireless LAN Access Point Configuration

Parameters	Description
Auto Rate Fall Back	Select Enable or Disable. When this is enabled, the
	wireless network provides more flexibility when wireless
	devices roam. As wireless devices move away from the
	Access Point, the transfer rate will automatically fall
	back to the most optimum rate allowed.
Wireless Channel	Select the channel to be used. Channels differ from
	country to country. There are 14 channels available.
WEP type	Select the 64(40) or 128 bits Wired Equivalent Privacy
	Algorithm.
WEP key	Select one of the keys (1~4) as the WEP encryption key
	for transmissions between stations and the Access Point.
Wireless Fragmentation	The size of the packets to be fragmented. Enter a value
Threshold	within a range of 256 to 2346 bytes.
Wireless RTS Threshold	Minimum packet size required for an RTS (Request To
	Send) transmission. For packets smaller than this
	threshold, an RTS is not sent and the packet is
	transmitted directly to the WLAN. The value is in a range
	of 256 to 2346 bytes.
WEP Keys #1 - #4	The default key that will be used. May be edited when
	WEP type is 64(40) bits. Enter 10 digit Hex values (in the
	range of “A-F”, “a-f” and “0-9”) as the encryption keys.
Preamble Type	The preamble defines the length of the CRC block for
	communication between the Wireless LAN Access Point
	and the roaming Wireless Stations. The Short Preamble
	option improves throughput performance.

10