Edimax Technology EW-7205AP user manual Privacy Options, Operational Settings

Page 24

Wireless LAN Access Point Configuration

Privacy Options

Pull down the Setup menu and select the Privacy Options from the Wireless LAN submenu.

Key 1~Key 4

64(40)-bit WEP: input 10 digit Hex values (in the “A-F”, “a-f” and “0-9” range) as the encryption keys.

128-bit WEP: input 26 digit Hex values (in the “A-F”, “a-f” and “0-9” range) as the encryption keys.

Default Key

Only the key you select it in the “Default key” will take effect.

WEP

Enable 64(40)-bit or 128-bit WEP (Wired Equivalent Privacy) to activate the WEP encryption for transmissions between stations and the Access Point.

Note: WEP is an authentication algorithm which protects authorized Wireless LAN users against eavesdropping. The Authentication type and WEP key must be the same on the wireless station and on the access point.

Operational Settings

Pull down the Setup menu and select the Operational Settings from the Wireless LAN submenu. Using this option you can either view or modify the parameters of the Access Point.

22

Image 24

Contents Wireless LAN Access Point Table of Contents Package Contents FeaturesSpecifications System Requirement Physical DescriptionFront Panel Back Panel DescriptionIntroduction Locate an optimum location for the Wireless LAN Access Point Hardware Installation is completeHow to Install the AP Utility Using the AP UtilityAccess Point Snmp Manager AP UtilityFor Example Wireless MAC Address Parameters Description MAC AddressRegulatory Domain Ethernet IP AddressWireless Channel Wireless FragmentationWireless RTS Threshold Parameters Description Auto Rate Fall BackParameters/Buttons Description Authentication Type Access Point NameOperational Rate Set Beacon PeriodParameters/Buttons Description Operational Mode User AccessAdministrator Administrator AccessParameters/Buttons Description Snmp Traps WEP 128 keys #1-#4Access Point Snmp Manager How to Install the Snmp ManagerWireless LAN Access Point Configuration Wireless LAN Access Point Configuration Wireless LAN Access Point Configuration Using the Snmp Manager Default IP Address Default Sub MaskConnecting to the Access Point Connect to the Access Point Find Access Point Configuring the Access Point Download ChangesIP Configuration Filtering ConfigurationRefresh Operational Settings Privacy OptionsEssid Open System Shared KeyBoth Modify Authorized MAC Address Enable Snmp Traps Authorization Password Setting Reset Device Restore DefaultViewing the Wireless Statistics Polling Interval Associated StationWireless Statistics Ethernet StatisticsWireless LAN Access Point Firmware Upgrade Tftp ClientHow to Install the Tftp Client Using the Tftp ClientTftp Client Wireless LAN Access Point Firmware Upgrade Can the Wireless Access Point act as my Dhcp Server? Can the Wireless Access Point connect to PC directly?What is Ad-hoc? What is Infrastructure?What is WEP? What is a MAC Address?Can data be intercepted while transmitting through the air?