Edimax Technology EW-7205AP Using the Snmp Manager, Default IP Address Default Sub Mask

Page 20

Wireless LAN Access Point Configuration

3.2.2 Using the SNMP Manager

Before using the SNMP Manager to configure the Access Point, verify the Ethernet station and the Access Point are on the same subnet. The following is the default IP address and Sub Mask of the Access Point:

Default IP Address: 10.170.254.32

Default Sub Mask: 255.255.254.0

In order to change the IP address and Sub Mask of the Access Point, you must use the AP Utility Application (only through the USB port). Please refer to Section 3.1.2 for the IP Address and Sub Mask configuration.

On the Start Menu, choose Start->Programs->Atmel Utilities->AP Configuration- >AP Configuration to start using the configuration tool.

18

Image 20

Contents Wireless LAN Access Point Table of Contents Package Contents FeaturesSpecifications Front Panel System RequirementPhysical Description Back Panel DescriptionIntroduction Locate an optimum location for the Wireless LAN Access Point Hardware Installation is completeHow to Install the AP Utility Using the AP UtilityAccess Point Snmp Manager AP UtilityFor Example Wireless MAC Address Parameters Description MAC AddressRegulatory Domain Ethernet IP AddressWireless Channel Wireless FragmentationWireless RTS Threshold Parameters Description Auto Rate Fall BackParameters/Buttons Description Authentication Type Access Point NameOperational Rate Set Beacon PeriodParameters/Buttons Description Operational Mode User AccessAdministrator Administrator AccessParameters/Buttons Description Snmp Traps WEP 128 keys #1-#4Access Point Snmp Manager How to Install the Snmp Manager Wireless LAN Access Point Configuration Wireless LAN Access Point Configuration Wireless LAN Access Point Configuration Using the Snmp Manager Default IP Address Default Sub MaskConnecting to the Access Point Connect to the Access Point Find Access Point Configuring the Access Point Download ChangesRefresh IP ConfigurationFiltering Configuration Operational Settings Privacy OptionsEssid Both Open SystemShared Key Modify Authorized MAC Address Enable Snmp Traps Authorization Password Setting Reset Device Restore DefaultViewing the Wireless Statistics Polling Interval Associated StationWireless Statistics Ethernet StatisticsWireless LAN Access Point Firmware Upgrade Tftp ClientTftp Client How to Install the Tftp ClientUsing the Tftp Client Wireless LAN Access Point Firmware Upgrade Can the Wireless Access Point act as my Dhcp Server? Can the Wireless Access Point connect to PC directly?What is Ad-hoc? What is Infrastructure?Can data be intercepted while transmitting through the air? What is WEP?What is a MAC Address?