Edimax Technology EW-7205AP user manual Open System, Shared Key, Both

Page 26

Wireless LAN Access Point Configuration

Auto Rate Fall Back

When this is enabled the transmission rate is the optimum rate. In case of obstacles or interference, the system will automatically fall back. Authentication Type

Open System:

Any station in the WLAN can associate with an Access Point and receive and transmitted data without authentication.

Shared Key:

Only stations using a shared key (WEP Key identified by the Access Point) are allowed to associate with the Access Point.

Both:

Stations can communicate with the Access Point either with or without data encryption.

Preamble Type

The preamble defines the length of the CRC block for communication between the Wireless Access Point and the roaming Wireless Stations. The Short Preamble option improves throughput performance.

Rx Antenna

Sets which antenna is used for reception. Select Diversity Antenna for the Access Point.

Tx Antenna

Set which antenna is used for transmission. Select Diversity Antenna for the Access Point.

24

Image 26

Contents Wireless LAN Access Point Table of Contents Package Contents FeaturesSpecifications Front Panel System RequirementPhysical Description Back Panel DescriptionIntroduction Locate an optimum location for the Wireless LAN Access Point Hardware Installation is completeAccess Point Snmp Manager How to Install the AP UtilityUsing the AP Utility AP UtilityFor Example Regulatory Domain Wireless MAC AddressParameters Description MAC Address Ethernet IP AddressWireless RTS Threshold Wireless ChannelWireless Fragmentation Parameters Description Auto Rate Fall BackOperational Rate Set Parameters/Buttons Description Authentication TypeAccess Point Name Beacon PeriodAdministrator Parameters/Buttons Description Operational ModeUser Access Administrator AccessParameters/Buttons Description Snmp Traps WEP 128 keys #1-#4Access Point Snmp Manager How to Install the Snmp ManagerWireless LAN Access Point Configuration Wireless LAN Access Point Configuration Wireless LAN Access Point Configuration Using the Snmp Manager Default IP Address Default Sub MaskConnecting to the Access Point Connect to the Access Point Find Access Point Configuring the Access Point Download ChangesRefresh IP ConfigurationFiltering Configuration Operational Settings Privacy OptionsEssid Both Open SystemShared Key Modify Authorized MAC Address Enable Snmp Traps Authorization Password Setting Viewing the Wireless Statistics Polling Interval Reset DeviceRestore Default Associated StationWireless Statistics Ethernet StatisticsWireless LAN Access Point Firmware Upgrade Tftp ClientTftp Client How to Install the Tftp ClientUsing the Tftp Client Wireless LAN Access Point Firmware Upgrade What is Ad-hoc? Can the Wireless Access Point act as my Dhcp Server?Can the Wireless Access Point connect to PC directly? What is Infrastructure?Can data be intercepted while transmitting through the air? What is WEP?What is a MAC Address?