Edimax Technology EW-7205AP user manual Specifications

Page 4

Introduction

Plug-and-play installation.

Desktop and wall mountable design.

1.3Specifications

Standards: IEEE 802.3 and IEEE 802.3u (Wired), IEEE 802.11b (Wireless)

Data Rate: 11, 5.5, 2, and 1Mbps

Security: 64(40)/128-bit WEP data encryption

Frequency Band: 2.400~2.4835GHz (Industrial Scientific Medical Band) Operating Channels:

Channels 1-11 (US, Canada)

Channels 1-13 (Europe ETSI) Channels 1-14 (Japan) Channels 10-11 (Spain) Channels 10-13 (France)

Connectors:

One USB port

One 10/100Mbps RJ-45

One SMB connector for external antenna or booster Antenna: Diversity Antenna inside.

Modulation: CCK@11/5.5Mbps, DQPSK@2Mbps and DBPSK@1Mbps

Radio Technology: Direct Sequence Spread Spectrum (DSSS) Operating Range:

Indoor: 35-100m

Outdoor: 100-300m

Configuration Utility:

Windows Configuration Utility supports USB interface configuration SNMP Utility: Available for wired stations with Windows 98/98SE/Me/

2000/XP

LEDs: Power, LAN Link/Activity, Wireless TX/RX

Power: 5VDC, 1.4A

Power Consumption

Transmit: Less than 800 mA

Receive: Less than 700 mA

Transmission Power: 14 dBm (Normal)@ -30 dB Side lobe

2

Image 4

Contents Wireless LAN Access Point Table of Contents Package Contents FeaturesSpecifications Physical Description System RequirementFront Panel Back Panel DescriptionIntroduction Locate an optimum location for the Wireless LAN Access Point Hardware Installation is completeHow to Install the AP Utility Using the AP UtilityAccess Point Snmp Manager AP UtilityFor Example Wireless MAC Address Parameters Description MAC AddressRegulatory Domain Ethernet IP AddressWireless Channel Wireless FragmentationWireless RTS Threshold Parameters Description Auto Rate Fall BackParameters/Buttons Description Authentication Type Access Point NameOperational Rate Set Beacon PeriodParameters/Buttons Description Operational Mode User AccessAdministrator Administrator AccessParameters/Buttons Description Snmp Traps WEP 128 keys #1-#4Access Point Snmp Manager How to Install the Snmp ManagerWireless LAN Access Point Configuration Wireless LAN Access Point Configuration Wireless LAN Access Point Configuration Using the Snmp Manager Default IP Address Default Sub MaskConnecting to the Access Point Connect to the Access Point Find Access Point Configuring the Access Point Download ChangesFiltering Configuration IP ConfigurationRefresh Operational Settings Privacy OptionsEssid Shared Key Open SystemBoth Modify Authorized MAC Address Enable Snmp Traps Authorization Password Setting Reset Device Restore DefaultViewing the Wireless Statistics Polling Interval Associated StationWireless Statistics Ethernet StatisticsWireless LAN Access Point Firmware Upgrade Tftp ClientUsing the Tftp Client How to Install the Tftp ClientTftp Client Wireless LAN Access Point Firmware Upgrade Can the Wireless Access Point act as my Dhcp Server? Can the Wireless Access Point connect to PC directly?What is Ad-hoc? What is Infrastructure?What is a MAC Address? What is WEP?Can data be intercepted while transmitting through the air?