Edimax Technology EW-7205AP Parameters/Buttons Description Authentication Type, Access Point Name

Wireless LAN Access Point Configuration

Parameters/Buttons	Description
Authentication Type	Defines the Access Point’s authentication type. Only the
	Wireless Stations that pass the authentication test can
	connect to the Access Point.
	Open System: any stations can associate with the
	Access Point without authentication.
	Shared Key: stations using a shared key (the WEP Key
	identified by the Access Point) can associate with the
	Access Point.
	Both: any stations can associate with the Access Point
	with or without authentication.
Access Point Name	Enter the Access Point’s name.
Operational Rate Set	By default the Access Point adaptively selects the highest
	possible rate for transmission. In case of obstacles or
	interference, the system will adjust the speed
	automatically. Select the basic rates to be used: 82 84 8B
	96 (1-2-5.5-11 Mbps) or 82 84 0B 16 (1-2 Mbps).
Beacon Period	Set the Beacon Period parameter, which specifies the
	duration between beacon packets (milliseconds). The
	range for the beacon period is between 20-1000 with a
	typical value of 100.
DTIM	Determines the interval the Access Point will send its
	broadcast traffic. Default value is 4 beacons.
Receive Antenna	Sets which antenna is used for reception. Select Diversity
	Antenna for the Access Point.
Transmit Antenna	Sets which antenna is used for transmission. Select
	Diversity Antenna for the Access Point.

11