Connect Tech Blue Heat/Net Sync User Manual
WCM (Web Configuration Manager)
Signing In to the Web Configuration Manager
You will need to know the IP address of your Blue Heat/Net Sync unit before you use the Web Configuration Manager. Use the Serial Configuration Manager to assign the Blue Heat/Net Sync a valid IP address, or tell the Blue Heat/Net Sync to use DHCP to automatically obtain an IP address. Please refer to the SCM Command Reference documentation for information on how to do this.
Once you know your IP address, open your web browser and go to: http://_your_ip_address_/ or http://www.hostname.com/
You will arrive at the Blue Heat/Net Sync Web Configuration Manager Sign In page. The default username is wcm. Leave this name as is. The default password is password. Use this username/password combination and click the Sign In button to log on to the Web Configuration Manager.
Figure 13: Web Configuration Manager Sign In
Once you have signed in, you should immediately change the default password.
At this point you should be directed to the Web Configuration Manager homepage.
To sign out of the Web Configuration Manager, just click on the Sign Out link on the upper
right hand side of the Web Configuration Manager.
Revision 0.03 | 31 |