Connect Tech Blue Heat/Net Sync User Manual
Default Settings
Network Settings
Blue Heat/Net Sync IP address | 192.168.42.1 |
|
Server IP address | 0.0.0.0 (used for firmware downloads) | |
Gateway IP address | 0.0.0.0 |
|
Subnet Mask | 255.255.255.0 |
|
Broadcast IP address | 255.255.255.255 (used by the bootp process) | |
Domain Name Server IP address: 0.0.0.0 (used for firmware downloads) | ||
Domain Name | blueheat.net |
|
Host Name | BHNssssssss | (where ssssssss is the BHN serial number) |
TCP Port | 49152 (0xC000) |
|
DNS IP | 0.0.0.0 |
|
Boot Settings
Default enabled:
Boot from Flash
Default disabled: use BOOTP use TFTP
Delay: 30 (seconds)
SCM Operation Settings
Password: | password |
Password Prompting: | enabled |
Loader Filename: | BHNloader_vvv.gz |
(where vvv is the version number of the Loader, current at the time the unit was manufactured).
Line Setting: | See Getting Access to the SCM section. |
Revision 0.01 | 67 |