Connect Tech CTIM-00043 user manual Specifications, Certification for CANpro/104

Page 24

CANpro/104 User Manual

Specifications

Operating Environment

Storage temperature:	-40	C to 125 C
Operating temperature:	-40	C to 85 C
Humidity:	95%, non-condensing

Power Requirements

+5 VDC @ 500mA (maximum)

380 mA (minimum)

NOTE:

Power output on CAN connectors may draw up to an additional 1A per port (non-isolated models). 190 mA per port (isolated models) given 150mA current draw in the +5V output.

PC Bus Interface

PC/104

Optical/Power Isolation (CANpro/104 Opto models only)

500V for each CAN port from the host system and other isolated CAN ports.

Dimensions

Compliant to PC/104 specification 2.5

Connectors/Interface

Standard: 10-pin, right angled header (+5V power output)

Optional: DB-9

Certification

Certification for CANpro/104

The CANpro/104 product family is to be included into a device ultimately subject to FCC, DOC/IC, and CE certification. The customer is responsible for bringing the completed device into compliance prior to resale.

Connect Tech has designed CANpro/104 with EMI and EMC considerations such as:

Ground and power planes

Controlled slew-rate signals

EMI/EMC reducing PCB layout

CTIM-00043 (0.01) 1/15/2010	www.connecttech.com	24
	800-426-8979 519-836-1291

Image 24

Contents CANpro/104 CTIM-00043 0.02 January 15Table of Contents CTIM-00043 0.01 1/15/2010 Copyright Notice Trademark AcknowledgementRevision History Features IntroductionHardware Installation Rev C & Later Memory vs I/O SpacesMemory Space CTI CANpro/104 Spaces SpaceMemory Space Enabling J3A Position #1 FunctionBase Address Decoding AddressPosition #5 Position #6 Position #7 Jumper Memory Space Position Address Bit GroupWhen Memory Space is selected When I/O Space is selectedAddress Bit J3A or J3B Installed Value Position Or Removed PeliCAN vs BasicCAN Addressing ModesAddressing Examples J3C Position #2 FunctionExample #3 0x340 = XXXX.XXXX.XXXX.X 011.01CJ.JJJJ binaryExample #4 0x600 = XXXX.XXXX.XXXX.X 110.CJJJ.JJJJ binaryCan Controller Addressing Table Common Memory Space Address Selections BaseMemory Address Interrupt Mode and Selections 9D Connector Shell GroundPerformance Enhancement Can Bus OptionsSingle Interrupt Mode Dual Interrupt ModeShared Interrupt Mode Can Bus Dominant Timeout and Minimum SpeedSecurity ID Feature Position Function Jumper Installed Jumper RemovedJumper Summaries J3B J4 and J5Hardware Installation Rev a & B CANpro/104 Opto DiagramsInterrupts and Memory I/O Range Selection Unique Interrupt LinesSharing a Single Interrupt Line No InterruptsAddress Mode and Range Selection CanInterrupt Sharing Other On-board Jumper Selection Connector Pinouts DB-9 Cable Connector Pinouts Pin No Signal10-pin Header Pinouts Pin No Signal Specifications CertificationCertification for CANpro/104 Telephone/Facsimile Email/Internet Mail/Courier