Connect Tech 104 user manual

Page 15

Connect Tech FreeForm/PCI-104 User Manual

6) iMPACT will add the device to the JTAG chain.

7)Again, a prompt will ask for device number three (National PHY). Browse to the bsdl folder and select DP83849IVS.bsd. The device will be added to the JTAG chain.

8)To test stream integrity, right click on the FPGA and select Get Device ID. The console will report IDCODE = 82a6e093

Revision 0.00

Image 15

Contents FreeForm/PCI-104 Limited Lifetime Warranty Copyright NoticeTrademark Acknowledgment Email/Internet Customer Support OverviewContact Information Telephone/FacsimileTable of Contents List of Figures List of TablesIntroduction FeaturesComponents Description Jumpers /Switches DescriptionSlot Selection RSW1 Hardware Description and ConfigurationJumpers and Switches Slot Selection RSW1 Position Fpga Configuration Settings J1Connector Pinouts External Power Connection External Power Connector Pinout P8 Signal DirectionGpio Header P7 Gpio Header Pinout Signal DirectionFpga Development Environment Hardware InstallationSoftware Installation Standalone OperationLaunch Impact Fpga ConfigurationPage Page Programming the Fpga Generating a Prom MCS File Page Revision Configuring the Fpga / SPI flash Association Configuring the Fpga with the SPI FlashPage Programming the Flash Elapsed time = Bar Local Address Space 0 Bar Reference DesignFunctionality Memory MapLocal Address Space 1 Bar ImplementationSpecifications

Related manuals

Manual 26 pages 23.24 Kb