Connect Tech
Hardware Description and Configuration
The following sections describe the function of all switches/jumpers and provide details on connector pinouts.
Jumpers and Switches
Slot Selection (RSW1)
This rotary switch selects a slot position in the
Table 2: Slot Selection (RSW1)
Position | Slot |
0,4 | 0 |
1,5 | 1 |
2,6 | 2 |
3,7 | 3 |
FPGA Configuration Settings (J1)
Jumper J1 is used to control FPGA configuration.
Table 3: FPGA Configuration Settings (J1)
FPGA waits for configuration over JTAG, using the cable it is connected to
FPGA reads configuration from SPI flash
FPGA is
Revision 0.00 | 8 |