Connect Tech 104 user manual Programming the Flash

Page 22

Connect Tech FreeForm/PCI-104 User Manual

Programming the Flash

1) Right click the previously associated flash device, and select program.

2)The programming dialog will appear. Select “Verify ” and “Erase Before Programming”, then click OK.

Revision 0.00

22

Image 22

Contents FreeForm/PCI-104 Copyright Notice Limited Lifetime WarrantyTrademark Acknowledgment Telephone/Facsimile Customer Support OverviewContact Information Email/InternetTable of Contents List of Tables List of FiguresFeatures IntroductionJumpers /Switches Description Components DescriptionSlot Selection RSW1 Position Fpga Configuration Settings J1 Hardware Description and ConfigurationJumpers and Switches Slot Selection RSW1Connector Pinouts External Power Connector Pinout P8 Signal Direction External Power ConnectionGpio Header Pinout Signal Direction Gpio Header P7Standalone Operation Hardware InstallationSoftware Installation Fpga Development EnvironmentFpga Configuration Launch ImpactPage Page Programming the Fpga Generating a Prom MCS File Page Revision Configuring the Fpga with the SPI Flash Configuring the Fpga / SPI flash AssociationPage Programming the Flash Elapsed time = Memory Map Reference DesignFunctionality Bar Local Address Space 0 BarImplementation Local Address Space 1 BarSpecifications

Related manuals

Manual 26 pages 23.24 Kb