Juniper Networks E320 manual SFM-100 Module

SFM-100 Module

SFM-100 Module

Module label	SFM-100
IOA label	■	Not applicable
Number of IOA ports	■	Not applicable
Software release	■	First supported: 7.0.1
Description	■	40 W
	■ Switch fabric module (100 Gbps)
	■ Works with the SRP-100 module to create a switch fabric
	■ Must be installed only with SRP-100 module and SFM–100 modules
Capability	■	Not applicable
Software features	■	Not applicable
Line module compatibility	■	ES2 4G LM
	■ ES2 10G UPLINK LM
SRP module compatibility	■	SRP-100
	■ Cannot use with SRP-320 module or SFM-320 module
Module redundancy support	■	N+1 redundancy
Port redundancy support	■	Not applicable
Cables and connectors	■	Not applicable
LEDs	When lit, LED indicates:
	■ OK (green)—Self-test passed
	■ FAIL (red)—Failure detected
	■ ONLINE (green)—Online with no alarms or errors
	■ REDUN (green)—N+1 redundancy is enabled; 2 SRPs and 3 SFMs must be
		installed and working. When LED is unlit, one of the five fabric slices is down
		or not installed; N+1 redundancy is not enabled.
	NOTE: When REDUN LED is on, the module may be removed without interrupting
	service.
Alarms, errors, and events	■ See Monitoring Modules in JUNOSe System Basics Configuration Guide, Chapter 6,
		Managing Modules.

SFM-100 Module ■ 15