Juniper Networks E320 manual 10GE IOA, Multimode SR

E320 8.1.x Module Guide

10GE IOA

IOA label	ES2-S1 10GE IOA
Number of IOA ports	■	1
Software release	■	First supported: 7.0.1
Description	■	40 W
	■ Full-height module
	■ Uses a range of 10-gigabit small form-factor pluggable (XFP) transceivers to support
		different modes and cable lengths.
Capability	■	Ethernet (IEEE 802.3ae)
	■	10Gb Base-SR/LR/ER
	■ Port can operate in full duplex mode with an average data rate of 3.4 Gbps
Software features	■	See Ethernet IOAs on page 45 for information about the layer 2 and layer 3
		protocols and applications that this module combination supports.
Line module compatibility	■	ES2 4G LM
SRP module compatibility	■	SRP-100
	■	SRP-320
Line module redundancy	■	Can be paired with an ES2 4G LM.
compatibility	■	Must be installed in the same redundancy group as an ES2 4G LM and ES2–S1
		REDUND IOA combination.
Port redundancy support	■	Not applicable
Cables and connectors	■	One LC full duplex connector
(multimode [SR])	■	Transmit power:
		■	min: –7.3 dBm
		■	max: –1.0 dBm
	■	Receive input power:
		■	min: –9.9 dBm
		■	max: –1.0 dBm

■ See the following corresponding table (SR Fiber Optic Cabling) for cabling requirements.

■ See E320 Hardware Guide, Chapter 5, Cabling the Router for more information.

26■ 10GE IOA