Juniper Networks E320 manual 10GE PR IOA, Compatibility Port redundancy support

10GE PR IOA

10GE PR IOA

IOA label	ES2-S2 10GE PR IOA
Number of IOA ports	■	2
	■ 1 active, 1 redundant
Software release	■	First supported: 7.2.0
Description	■	40 W
	■ Full-height module
	■ Uses a range of 10-gigabit small form-factor pluggable (XFP) transceivers to support
		different modes and cable lengths.
	■ Pairs only with ES2 10G UPLINK LM and ES2 10G LM to provide 10-Gigabit Ethernet
		operation through a single line interface
	■ Router can accommodate up to two ES2 10G UPLINK LM and ES2-S2 10GE PR IOA
		combinations
Capability	■	Ethernet (IEEE 802.3ae)
	■	10Gb Base-SR/LR/ER
	■ Port can operate in full duplex mode with an average data rate of 10 Gbps
Software features	■	See Ethernet IOAs on page 45 for information about the layer 2 and layer 3 protocols
		and applications that this module combination supports.
Line module compatibility	■	ES2 10G UPLINK LM only
SRP module compatibility	■	SRP-100
	■	SRP-320
Line module redundancy	■	Not applicable
compatibility
Port redundancy support	■	Yes

10GE PR IOA ■ 29