Appendix A
IOA Protocol Support
This appendix lists the layer 2 and layer 3 protocols and applications that IOAs support in combination with the listed LM. IOAs are identified by their physical labels. See Table 1 on page 3 for a list of IOAs and their identifying labels.
The designation “not yet fully qualified” that appears in some tables in this appendix indicates that support for the protocol or application on the specified IOA has not yet been fully qualified by Juniper Networks. If you use a feature before it has been fully qualified, it is your responsibility to ensure that it operates correctly in your targeted configuration.
This appendix contains the following sections:
■Ethernet IOAs on page 45
■OCx/STMx ATM IOAs on page 53
■OCx/STMx POS IOAs on page 56
■Service IOA on page 59
Ethernet IOAs
Table 16: Ethernet IOAs with ES2 4G LM
| |||
Protocol or Application | 4G LM) | 4G LM) | 4G LM) |
Accepts traffic destined for | Yes | Yes | Yes |
GRE tunnels or DVMRP |
|
|
|
|
|
| |
APS/MSP | No | No | No |
ATM | No | No | No |
BERT | No | No | No |
BGP | Yes | Yes | Yes |
BGP/MPLS VPNs | Yes | Yes | Yes |
Bridged Ethernet | No | No | No |
Ethernet IOAs ■ 45