Freedom9 4020 user manual Email Alerts, Deleting a client

Page 47

Deleting a client

If you remove DiskSafe Express from a particular computer, or if you change the computer name, the original computer name remains on the storage system and counts toward the total number of computers that are allowed to back up to the storage system. To both delete all backups of all disks for a particular computer and the computer name, you must delete the client itself.

To delete a client:

1.Select the radio button to the left of the computer whose backups and computer name you want to delete from the storage system (in the first Select column).

2.Click “Delete Client”.

3.When prompted to confirm the deletion, click “Yes”.

All backups of all disks associated with this computer are deleted, and the computer name is also deleted from the storage system.

Note: If you delete a client and the user did not previously remove protection for that disk, when the user subsequently accesses DiskSafe Express, the Status page will indicate that the backup of the protected disk is offline. To back up the disk once again, the user must remove protection and then protect the disk again.

3.7Email Alerts

Clicking on the “Advanced” button in the menu will open the Alerts page (Figure 3-18) which allows you to set up the storage system to send notification emails to up to three email addresses if a problem occurs—for example, if one of the disks fails, or if insufficient space is available for creating new files or performing a backup. To take advantage of this feature, you must have access to an SMTP e-mail server, either within your own network or through an Internet service provider.

Note: The e-mail might not be sent immediately when the problem occurs, but will be sent within an hour of the event. In addition, if the problem is fixed within an hour of its occurrence – for example, if you replace the disk that failed – the alert will not be sent.

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Rev N0042000 FreeStorCopyright and Trademark Information Table of Contents Stopping a Backup or Recovery in Progress List of Figures 102 Terminology System Benefits and Key FeaturesProduct Specifications Package Contents Front Panel Requirements Rear PanelLAN port Serial ATA hard diskHard Drive Installation Installation and SetupAttaching the Hard Drive to the Tray Welcome Storage System Console InstallationReview your selections and click Next to proceed Figure To complete the installation, click Finish Figure Storage System Console System Setup10 System Initialization Screen 11 Welcome Screen Numbers, and hyphens. To proceed, click Next 15 Network Settings Page 17 Backup Calculator 18 Disk Space Distribution Web Management Interface Home Main MenuHome Connections UsersTo add a new user Add User NFS Add User To remove an existing user GroupsTo edit an existing user Groups To add a new group10 Add Group To edit an existing groupRemoving an existing group 11 Shared Folders Shared FoldersTo add a new shared folder 12 Add Shared Folder 14 NFS Add Shared Folder 15 Cifs Define Folder Permissions 16 NFS Define Folder Permissions To edit an existing shared folder To delete an existing shared folder 17 Backups Managing BackupsDeleting backups To change the recovery CD passwordDeleting a client Email Alerts18 Alerts Firmware Upgrades 19 Firmware USB Devices20 USB System Settings 21 System Network Settings 22 Network FreeStor 4020 User’s Manual 23 Disks Disk ConfigurationFreeStor 4020 User’s Manual 24 Disk Configuration 25 Disks to Back Up 26 Disk Space Distribution Shutting Down Logging Out29 Shut Down Windows Clients Using My Computer or Windows ExplorerFile Sharing Using the Storage System Console Linux Clients Other Mac operating systems Macintosh ClientsFTP Clients System Backups with DiskSafe Express System Requirements Installing the Microsoft iSCSI Initiator ISCSI Initiator Warning Installing DiskSafe ExpressNET Framework License Agreement DiskSafe Express License Agreement DiskSafe Express Installation Completed Activating Your License Key Starting DiskSafe ExpressActivating your license without an Internet connection Replacing your existing license 11 DiskSafe Express Disk Selection Protecting Your Disks12 Add Storage System Recommendations13 Storage System Selection 14 Previously Backed Up Page 16 Recover CD Password Manually Backing Up Your Disk Stopping a Backup or Recovery in ProgressChanging the Recovery CD Password Changing the Backup ScheduleSystem Restoration with DiskSafe Express 18 Changing Recovery CD Password DialogRecovering Files From a Backup Page Recovering a Non-System Disk or Partition Recovering a System Disk or Partition Page Page Page Removing Protection Appendix ADisk Configurations Adding Hard Disks Adding hard disks to a linear or normal RAID configuration Figure B-1 Disk Change Notification Take the desired action 100 Removing or Replacing Hard DisksResponding to RAID degradation 102 Figure B-5 Disk Change Notification Page RAID Failure Swapping hard disksTransferring hard disks to a new storage system 105 Viewing the system log Appendix BTroubleshootingMac users Disconnecting from Shared FoldersWindows users Linux users108 Troubleshooting the DeviceResolution 110 Troubleshooting DiskSafe ExpressProblem The Status page indicates that the backup is offline Using DiskSafe Express Creating a Diagnostic FileUsing the recovery CD Appendix CGlossary 115

4020 specifications

The Freedom9 4020 is a cutting-edge network interface device designed for a variety of applications, ranging from home use to small business environments. This versatile device is praised for its robust performance, extensive connectivity options, and user-friendly features, making it an excellent choice for those seeking a reliable network solution.

One of the standout characteristics of the Freedom9 4020 is its advanced wireless capabilities. It supports dual-band Wi-Fi, allowing users to connect to both 2.4 GHz and 5 GHz frequencies. This feature ensures optimal performance by minimizing interference and maximizing speed, making it ideal for high-bandwidth tasks such as streaming and gaming.

In terms of connectivity, the Freedom9 4020 is equipped with multiple Ethernet ports, enabling wired connections for devices that require stable and fast internet access. These ports support Power over Ethernet (PoE), which simplifies installation by eliminating the need for separate power supplies for each connected device. This is particularly beneficial in settings where devices like IP cameras or VoIP phones are deployed.

Another key feature is the device's support for advanced security protocols. The Freedom9 4020 utilizes WPA3 encryption, providing enhanced protection for connected networks. This is crucial in today’s environment, where cybersecurity threats are increasingly prevalent. The device also includes features like a built-in firewall and VPN support, enabling secure remote access for users.

The Freedom9 4020 is designed with scalability in mind. Organizations can seamlessly integrate it into existing networks and expand as their needs grow. This flexibility makes it suitable for various applications, from home automation systems to small business networks.

The user interface is intuitive, featuring a web-based management platform that allows users to monitor and control their network easily. This system provides real-time insights into network performance, making troubleshooting straightforward.

Overall, the Freedom9 4020 stands out as a versatile and powerful networking solution. With its robust wireless performance, extensive connectivity options, strong security features, and user-friendly interface, it meets the demands of modern users looking for reliability and efficiency in their network devices.
Top Page Image Contents