Freedom9 4020 user manual

Page 93

15. Select the disk where you want to recover the data, and select “Next”.

Note: If you are recovering a system disk, the system to which you are recovering the data must be identical to the original system. For example, if the original system had a particular type of network adapter, the system to which you are recovering the data must have the exact same type of network adapter. Otherwise, the recovered files will not operate properly.

16.If you selected the backup of a disk in step 10, go to step 18.

If you selected the backup of a partition in step In the left column, select the backup that corresponds to the disk or partition that you selected, select Restore to a partition to recover to an existing partition on the selected disk, or select Clear all partitions and create new to delete all the existing data on the selected disk and recover only the selected partition.

17.If you selected Restore to a partition in step If you selected the backup of a disk in step In the left column, select the backup that corresponds to the disk or partition that you selected, select the partition where you want to recover the data, and then select Next. (Otherwise, go to step Select .)

18.Select Yes to confirm the action.

Warning: This overwrites any existing data on the selected disk. Although you can subsequently recover different data, you cannot recover the original data.

The status screen displays the progress of the recovery. You can cancel it at any time by selecting Abort. However, this leaves the disk or partition in an incomplete state (some of the data will have been recovered, but not all of it).

19. When the completion screen appears, review the results and do one of the following:

•To review information about any sectors that were not successfully recovered, select “Failed Sectors”, review the displayed information, and select “Back”.

•To recover another disk or partition, select “Continue”.

•If you want to recover a different backup of the same computer from the same storage system, select “Yes” to retain the current configuration settings and return to step In the left column, select the backup that corresponds to the disk or partition that you selected.

•If you want to recover a different computer’s backup, or if you want to recover a backup of the same computer from another storage system, select “No” to modify the current configuration settings and return to step 5.

93

Page 92 Page 94
Image 93
Page 92 Page 94
Contents Rev N0042000 FreeStorCopyright and Trademark Information Table of Contents Stopping a Backup or Recovery in Progress List of Figures 102 Terminology System Benefits and Key FeaturesProduct Specifications Package Contents Front Panel Requirements Rear PanelLAN port Serial ATA hard diskHard Drive Installation Installation and SetupAttaching the Hard Drive to the Tray Welcome Storage System Console InstallationReview your selections and click Next to proceed Figure To complete the installation, click Finish Figure Storage System Console System Setup10 System Initialization Screen 11 Welcome Screen Numbers, and hyphens. To proceed, click Next 15 Network Settings Page 17 Backup Calculator 18 Disk Space Distribution Web Management Interface Home Main MenuHome Connections UsersTo add a new user Add User NFS Add User Groups To edit an existing userTo remove an existing user Groups To add a new group10 Add Group To edit an existing groupRemoving an existing group 11 Shared Folders Shared FoldersTo add a new shared folder 12 Add Shared Folder 14 NFS Add Shared Folder 15 Cifs Define Folder Permissions 16 NFS Define Folder Permissions To edit an existing shared folder To delete an existing shared folder 17 Backups Managing BackupsDeleting backups To change the recovery CD passwordDeleting a client Email Alerts18 Alerts Firmware Upgrades 19 Firmware USB Devices20 USB System Settings 21 System Network Settings 22 Network FreeStor 4020 User’s Manual 23 Disks Disk ConfigurationFreeStor 4020 User’s Manual 24 Disk Configuration 25 Disks to Back Up 26 Disk Space Distribution Shutting Down Logging Out29 Shut Down Using My Computer or Windows Explorer File SharingWindows Clients Using the Storage System Console Linux Clients Macintosh Clients FTP ClientsOther Mac operating systems System Backups with DiskSafe Express System Requirements Installing the Microsoft iSCSI Initiator ISCSI Initiator Warning Installing DiskSafe ExpressNET Framework License Agreement DiskSafe Express License Agreement DiskSafe Express Installation Completed Activating Your License Key Starting DiskSafe ExpressActivating your license without an Internet connection Replacing your existing license 11 DiskSafe Express Disk Selection Protecting Your Disks12 Add Storage System Recommendations13 Storage System Selection 14 Previously Backed Up Page 16 Recover CD Password Manually Backing Up Your Disk Stopping a Backup or Recovery in ProgressChanging the Recovery CD Password Changing the Backup ScheduleSystem Restoration with DiskSafe Express 18 Changing Recovery CD Password DialogRecovering Files From a Backup Page Recovering a Non-System Disk or Partition Recovering a System Disk or Partition Page Page Page Removing Protection Appendix ADisk Configurations Adding Hard Disks Adding hard disks to a linear or normal RAID configuration Figure B-1 Disk Change Notification Take the desired action 100 Removing or Replacing Hard DisksResponding to RAID degradation 102 Figure B-5 Disk Change Notification Page RAID Failure Swapping hard disksTransferring hard disks to a new storage system 105 Viewing the system log Appendix BTroubleshootingWindows users Disconnecting from Shared FoldersLinux users Mac users108 Troubleshooting the DeviceResolution 110 Troubleshooting DiskSafe ExpressProblem The Status page indicates that the backup is offline Using DiskSafe Express Creating a Diagnostic FileUsing the recovery CD Appendix CGlossary 115

4020 specifications

The Freedom9 4020 is a cutting-edge network interface device designed for a variety of applications, ranging from home use to small business environments. This versatile device is praised for its robust performance, extensive connectivity options, and user-friendly features, making it an excellent choice for those seeking a reliable network solution.

One of the standout characteristics of the Freedom9 4020 is its advanced wireless capabilities. It supports dual-band Wi-Fi, allowing users to connect to both 2.4 GHz and 5 GHz frequencies. This feature ensures optimal performance by minimizing interference and maximizing speed, making it ideal for high-bandwidth tasks such as streaming and gaming.

In terms of connectivity, the Freedom9 4020 is equipped with multiple Ethernet ports, enabling wired connections for devices that require stable and fast internet access. These ports support Power over Ethernet (PoE), which simplifies installation by eliminating the need for separate power supplies for each connected device. This is particularly beneficial in settings where devices like IP cameras or VoIP phones are deployed.

Another key feature is the device's support for advanced security protocols. The Freedom9 4020 utilizes WPA3 encryption, providing enhanced protection for connected networks. This is crucial in today’s environment, where cybersecurity threats are increasingly prevalent. The device also includes features like a built-in firewall and VPN support, enabling secure remote access for users.

The Freedom9 4020 is designed with scalability in mind. Organizations can seamlessly integrate it into existing networks and expand as their needs grow. This flexibility makes it suitable for various applications, from home automation systems to small business networks.

The user interface is intuitive, featuring a web-based management platform that allows users to monitor and control their network easily. This system provides real-time insights into network performance, making troubleshooting straightforward.

Overall, the Freedom9 4020 stands out as a versatile and powerful networking solution. With its robust wireless performance, extensive connectivity options, strong security features, and user-friendly interface, it meets the demands of modern users looking for reliability and efficiency in their network devices.
Top Page Image Contents