For Windows 2000: From the desktop click the Start button, point to Settings and then Network and
For Windows 98 and Me: From the desktop click the Start button, then point to Settings and then Control Panel. Double- click the Network icon to display the Network configuration screen. Highlight your NIC card’s TCP/IP entry (it should start with TCP/IP and have the characters 10/100, NIC, or Ether in it
–and not have the words AOL,
4 Windows Users Only: Enter the IP Settings.
For Windows 2000 and XP:
Click the Use the following IP address and Use the following DNS server addresses buttons so that a black dot appears. Then enter the settings for IP address, Subnet mask, Default gateway, and Preferred DNS server. Most users can copy the information exactly as it is shown in the chart below. However, if you chose an IP address in Step 2 other than 10.2.2.16, enter the number that you chose instead of 10.2.2.16. When done, click
OK and continue with Step 7.
IP address | 10.2.2.16 |
|
|
Subnet mask | 255.255.255.0 |
|
|
Default gateway (V3’s LAN IP address) | 10.2.2.2 |
|
|
Preferred DNS server | 10.2.2.2 |
|
|
For Windows 98 and Me:
Click Specify an IP Address and enter the settings for IP Address and Subnet Mask shown below, unless you chose an IP address in Step 2 other than 10.2.2.16, in which case you should enter the number that you chose instead of 10.2.2.16.
38 | Zoom V3 User’s Guide |