Zoom Zoom V3 manual Step, Red Hat Linux Users Only, For Mac OS 7.6.1

Page 40

For Mac OS 7.6.1 – 9.2.2:

From the Apple menu, choose Control Panels and then TCP/IP to display the TCP/IP Window. Under the TCP/IP tab, highlight Manually in the Configure: list box and enter the settings for IP Address, Subnet mask, Router address, and Name server addr. shown below, unless you chose an IP address in Step 1 other than 10.2.2.16, in which case you should enter the number that you chose instead of 10.2.2.16. When done, close the Window and you will be prompted to click Save. Then continue with

Step 7.

IP address

10.2.2.16

 

 

Subnet mask

255.255.255.0

 

 

Router address

10.2.2.2

(V3’s LAN IP address)

 

 

 

Name server addr.

10.2.2.2

 

 

6 Red Hat Linux Users Only:

aEdit /etc/sysconfig/network-scripts/ifcfg-eth0 so that it contains the following lines:

DEVICE=eth0

ONBOOT=yes

BOOTPROTO=static

BROADCAST=10.2.2.255

NETMASK=255.255.255.0

IPADDR=10.2.2.16

GATEWAY=10.2.2.2

NETWORK=10.2.2.2

bThen edit or create /etc/resolv.conf so that it contains the following line:

NAMESERVER=10.2.2.2

Note:

If you are using another version of Linux and you are unsure how to enter this information, consult the help file or documentation that came with your operating system.

40

Zoom V3 User’s Guide

Image 40
Contents Zoom Page Contents Settings Overview Installation Instructions What’s in the PackageWhat You Will Need DSL phone filterInstalling the Software Select your language and click the Installation WizardInstalling the Hardware Software must be installed before you proceedMaking the Connections Plug your phone into the V3’s Phone jackZoom V3 User’s Guide Powering Up Plug in the V3’s Power SupplyConfiguring Internet Explorer If you cannot access Internet ExplorerInstallation Instructions Configuring Your Configuring the V3 for a Cable ModemOpen the Zoom Configuration Manager Configuring the V3 for a DSL ModemLog in to the Zoom Configuration Manager Basic Setup page displays Configuring the V3 for DSL PPPoE, PPPoA, 1483, or Static IP If you selected DSL PPPoEIf you selected DSL PPPoA or DSL If you selected DSL with Static IPTroubleshooting Tips on Setting up VoIP ServiceTips for Making VoIP Calls Setting the V3 for VoIP Only Mode If You Need Help Front Panel DescriptionVoIP Installation Instructions Windows Users Removing Changing Your VoIP Settings Voice Over IP SettingsIf Your Unit Is Not Preset for VoIP Open the Voice Over IP Voice Over IP Settings Open the Advanced VoIP Setup Can choose any ring listed for any country Call Forwarding and Call Waiting Enabling Call Management Features Activating Call Management Features # Forward code Forward Number ## Forward Deactivate code # Sample Table of Enable/Disable CodesFunction Using Your V3 with Xbox Live Playing Online GamesUsing Your V3 with PlayStation Select Advanced Setup and then Set Manual IPPrimary DNS 10.2.2.2 Secondary DNS Playing Online Games Setting Up a Virtual Server Find out which ports need to be opened for gamingChoose an IP address for Gaming OK and continue with Step Windows Users Only Enter the IP SettingsFor Windows 98 and Me For Mac OS IP address 10.2.2.16 Subnet mask 255.255.255.0Red Hat Linux Users Only StepFor Mac OS 7.6.1 Configure the Virtual Server Public Port Private PortPort Type Host IP AddressPlaying Online Games Setting Up a DMZ Choose an IP address Windows Users Only Enter the IP Settings For Mac OS Step Configure the DMZ Using the V3’s Advanced Firewall Using the V3’s Advanced Firewall Main Firewall Features Protection PolicyReassembly IP SpoofChecking Ping of DeathHacker Log Service Filtering Creating Inbound/Outbound Policies Inbound Policies Outbound Policies See page 62, they would appear in this list as Setting Up Firewall Databases IP GroupIP/Mask Are Single IP, IP Range, or Subnet Mask. YourIP Entry Name IP addr.1Service Group Service Entry NameTime Group Port #Time Window Name Time PeriodDSL Internet Settings Tables Appendix aUSA Service Providers DSL Connection Type Outside USA DSL Connection TypePage Plug Multiple Phones Directly into VoIP Phone Installation OptionsUse Cordless Phones to Link to Mac and Linux Users Setting TCP/IP Network Settings Macintosh TCP/IP SettingsLinux TCP/IP Settings For Mac OS 7.6.1For RedHat Troubleshooting Connection Troubleshooting Tips Appendix DSelect Release and click Save Changes Your Ethernet or USB cable connections are okayYour WAN connection is okay Windows usersTCP/IP Properties dialog box Zoom V3 User’s Guide VoIP and Phone Troubleshooting Tips Zoom V3 User’s Guide When I pick up the phone, I don’t hear a dial tone When some people call me, my Caller ID display doesn’t workMy phone’s ring sounds strange Appendix E Regulatory InformationIndustry Canada Emissions Statement Declaration of Conformity Zoom V3 User’s Guide Appendix E Regulatory Information 3545-B 27329 2005