•From time to time, Zoom may release improved firmware. This is available at www.zoom.com , along with upgrade instructions. We recommend that you check this site periodically for updates.
1.7Changing the V3’s Password
&Resetting the Unit to Its Default Settings
To change the V3’s Password, click the Advanced Setup icon at the top of the Zoom Configuration Manager. Under the Administration heading, click Admin Password.
•Type the new password, then retype it for verification purposes.
•Click Save Changes, Write Settings to Flash and Reboot, and Confirm.
Note:
The password must be at least 8 characters. If you change your password and then forget it, your only recourse is to reset it to the default by performing a hardware system reset (see below).
Chapter 1: Installation Instructions | 21 |