Zoom 10BaseT user manual Appendix a, Front Panel Information

Appendix A

Front Panel Information

After you’ve correctly installed the Zoom Cable Modem, the READY light, 10BT light, and SYNC light go on to indicate that the modem is fully operational.

Light	Mode	Status
READY	On	Power is on.
10BT	On	The 10BaseT/Ethernet Cable
		Modem is connected to the
		computer (the computer must be
		turned on).
ACT	Blinking	Activity is present on the cable.
		The cable modem is sending
		data to the cable service provider
		or receiving data from it.
		This light flickers during the
		synchronization process.
SYNC	Blinking Fast	Searching for a data channel
		from the cable provider.
	Blinking Slow	Synchronizing with the cable
		network and adjusting the signal
		for optimum performance.
	Steady On	The modem is synchronized to
		the cable network.

Appendix A: Front Panel Information 31