Avaya P117F(R) manual Meaning of the P117F Front Panel Buttons

Chapter 2 Installation

Table 2 Meaning of the P117F Front Panel Buttons

Button	Function
	Select

Reset

Meaning

The buttons determine what function will be displayed by the 17 Port LEDs (the top two rows of LEDs).

The five Function LEDs (above the Select buttons) show which function is currently displayed by the Port LEDs. The Port LEDs can display either Link, Collision, Transmit, Receive or Full Duplex.

If, for example, the Link (LNK) LED is lit, then LEDs 1 to 17 will display the Link status of every port.

(For P117FR ATM port LEDs, see also Table 4).

Press left or right button to toggle the Port LED display between functio

Press and hold both buttons simultaneously for two seconds to reset the entire P110 stack. In a Reset, all LED indicators turn on. Pressing Reset does not affect configuration settings.

Table 3 Meaning of the P117F(R) Stackable Switch front panel LEDs

LED Indicator		Function	Status
PWR		Power	OFF
			ON
			Blink
NMA		Agent	OFF
			ON
RED NMA		Reserved for future use
OPR		CPU	OFF
		Operation	Blink
Function LED			Port LED
	LNK	Link status	OFF
			ON
			Blink once
			Blink
			twice
	COL	Collision	OFF
			ON
	Tx	Transmit to	OFF
		line	ON
	Rx	Receive	OFF
		from line	ON
	FDX	Half/Full	OFF

Meaning

Mains power not connected Mains power connected Working on back-up power supply

No agent in this module

This module contains an active agent

CPU is OK

CPU is faulty

(1 to 17)

Port Disabled

Port is enabled and link is OK Link Test Fail

Partition (Ethernet only)

No Collision (ATM is always OFF) Collision occurred on line (Ethernet only)

No activity

Data transmitted

No activity

Data Received

Half duplex connection to port

P117F(R) Stackable Switch Installation Guide 11