Avaya P117F(R) manual The TFTP Process, Software Download Procedure

Page 21
The TFTP Process

Chapter 3

Configuration

The TFTP Process

The agent software file should be placed on a computer that can be located anywhere on the network. During the TFTP process, the computer acts as the Server and the agent as the Client. From the Terminal, the user configures the agent with the IP address of the TFTP server, the file name to be downloaded, and the download destination bank. The Agent then gets the specified file from the server.

During the download process the user can monitor the process status parameters by using the Monitor Software Download Process sub menu. The agent remains fully functional during the download process. At the end of a successful download, the whole stack resets automatically.

Software Download Procedure

Before starting the download procedure, do the following:

1.Ensure that the supplied agent software file resides on a computer with TFTP server capabilities.

2.Ensure that the file is accessible to the agent. Contact the agent from the TFTP server by typing ping <ip_address_of_agent>.

Download software to the agent as follows:

1.Select Software Download from the Setup Main Menu. This opens the Software Download menu shown below.

Software Download Menu (Using TFTP/IP)

Visage 16155(R) S/W Version:_____ Slot #:_____

<CR> Refresh the screen

0.Return to Previous Menu

1.Save the Session

2.List

---------------------------------

3.TFTP Server and File parameters

4.Start Software Download process

5.Monitor Software Download process

>>>Enter your choice:

2.Select TFTP Server and File parameters from the Software Download menu. This opens the menu shown below.

P117F(R) Stackable Switch Installation Guide

19

Image 21
Contents STACKABLE ETHERNET SWITCH WITH ATM UPLINK AvayaInstallation Guide P117FRPage PRECAUTIONS DE SECURITÉ SAFETY PRECAUTIONSImportant Information Preface4. Austauschen einer durchgebrannten Sicherung NUR mit der gleichen Sorte und Belastbarkeit wie sie auf der Sicherheitsaufschrift markiert ist. Die Aufschrift befindet sich neben der Stromzufuhr wo sich auch der Sicherungskasten befindet Overview ChapterDescription Description ChapterSetting the DIP switches InstallationFigure 1 The P117FR Stackable Switch Rear Panel Showing the DIP Switches in their Default PositionsInstalling the P117FR Stackable Switch Standalone Operation - Plug ‘n’ PlayStacking Operation Cabling Requirements Exoplane cables. A P110 NMA resides in the uppermost switchInstallation Rack Mounting Figure 3 P110 rack mounting arrangementFigure 5 The P117FR Front Panel LEDs and Buttons Figure 4 The P117F Front Panel LEDs and ButtonsTable 2 Meaning of the P117F Front Panel Buttons Table 3 Meaning of the P117FR Stackable Switch front panel LEDsMeaning of the additional P117FR front panel LEDs Software Download to the On-Board Agent Connecting the Console TerminalSetup Menus Software Download SummarySetup Main Menu Press Enter to view the Setup Main Menu How to Navigate through the Setup menus Parameter configuration 1 - Reset the ModuleCR - Refresh The Screen 2 - Software Download General The TFTP Process Software Download Procedure3. Type the IP address of the TFTP server and press Enter ping ipaddressofagent Troubleshooting Software Download3 - Agent Access Addresses 6. Type 0 to return to the main menu 4 - IP Routes 2. Select Add to define a new IP Route To define an IP RouteSelect Delete to remove an existing IP Route IP Routes menu Visage 16155R S/W Version Slot #4. Type the Gateway IP address address of the router and press Enter The default community for all three options is public 2. Enter the community name or Enter to leave it unchanged Listing Permanent Managers 1. To list permanent managers, select List2. Press Enter to return to the Permanent Managers Menu Adding Permanent Managers Deleting Permanent ManagersUpdating Permanent Managers Changing the UNI Version 8 5 - UNI VersionChanging the ATM Physical Media 9 6 - ATM Physical Media10 7 - ILMI/ATM Address Changing configured ATM address ILMI11 8 - LECS ATM Address Changing the Configured LECS ATM address12 9 - ELAN Configuration Display ELAN/VLAN associations Changing the Default ELAN Name Displaying Default ELAN information13 10 - ATM Redundancy 15 12 - Set Ethernet Port Parameters to their default values 14 11 - Set ATM Port Parameters to their Default ValuesConfiguration Figure 6 Terminal port - RS-232 Wiring Connection to Console Terminal Terminal Connector Pin AssignmentsDocument number 130001 Rev. A 2003 Avaya Inc. All rights reserved