Avaya P117F(R) manual 10 7 - ILMI/ATM Address, Changing configured ATM address ILMI

Chapter 3 Configuration

10 (7) – ILMI/ATM Address

This option allows you to define how the ATM address prefix will be allocated to the P117F(R) unit. To access the ATM address prefix menu select ATM Address:

ILMI/ATM address menu

Visage 16155(R) S/W Version: ____ Slot #: ____

<CR> Refresh the screen

0.Return to Previous Menu

--------------------------------------

1.Display current ATM address prefix

2.Display configured ATM address (ILMI)

3.Display default ATM address (ILMI)

--------------------------------------

4Change configured ATM address (ILMI)

>>>Enter your choice:

Changing configured ATM address (ILMI)

1.To change the configured ATM address prefix select “Change configured ATM address (ILMI)”.

You can define the ATM address in two ways: either

•Type 0 for the P117F(R) to use the ILMI protocol to obtain the 13-byte ATM prefix from the ATM switch, or

•Enter 19 bytes manually: the 13-byte ATM prefix and the 6-byte ATM ESI. The manual option is intended for switches that do not support the ILMI protocol.

Current ATM address prefix	: 39.00.00.00.00.00.00.00.00.6f.07.c0.cb
Configured ATM address	: using ILMI
Default ATM address	: using ILMI

>>>Enter ATM address (xx.xx ... 19 bytes, 0 for using ILMI) : 39.00.00.00.00.00.00.00.00.5a.07.cf.cb

>>>PRESS Enter to continue:

2.Press Enter to return to the ATM address prefix menu.

3.Reset the module for the changes to take effect (press 0 to return to Main Menu and then 1 to Reset).

P117F(R) Stackable Switch Installation Guide 33