Optimus STAV-3370 Connecting a Turntable, Connecting Cassette Decks, Connecting a CD Player

Preparing Your Receiver

Connecting Program Sources You can connect up to five external program sources to your receiver.

L
R
							L		L
L								R	R
	FM
R	UNBAL
	75
				TO MONITOR TV		IN	OUT	IN
	GND			VIDEO OUT					VIDEO
	AM		REC	PLAY
		L							IN
	GND								L
	LOOP	R							OUT
	ANTENNA								R
	ANTENNA	PHONO	TAPE2		CD	LD	VCR		CONTROL
			MONITOR				/TAPE1
	L		GND
	R
									L

OUT PUT
L
R	CD

Use shielded audio cables with phono connectors for all audio connections.

Connecting a Turntable

Connect a turntable with a magnetic cartridge only. Some older turntables use a ceramic-type cartridge that does not work with this system.

Connect the turntable’s left and right cables to the receiver’s left and right PHONO jacks. Then connect the turntable’s ground wire to the receiver’s GND terminal.

Note: If you place the cassette deck directly above, below, or to the left of the receiver, the receiver could interfere with the cassette deck’s operation. If possi- ble, position the cassette deck to the right of the receiver or locate it away from the receiver.

Connecting Cassette Deck(s)

You can connect cassette decks to the VCR/TAPE 1 and the TAPE 2 MONITOR jacks. Connect the cassette deck’s output jacks to the VCR/TAPE 1 IN (audio) or TAPE 2 PLAY jacks, and connect the input jacks of your cassette deck to VCR/ TAPE 1 OUT (audio) or TAPE 2 REC jacks.

You can connect a third cassette deck (for playback only) to the LD IN (audio) jacks.

Connecting a CD Player

To connect a CD player to the receiver, connect the CD player’s left and right output jacks to the receiver’s L and R CD input jacks.

8