Buffalo Technology WBR2-G54 Enter ISP information, DSL Button, Automatic IP Assignment by ISP

Page 16

Initial

Settings

Screen

Initial DSL

button

Screen

Standard Settings

Enter ISP information

•Click the appropriate button to select the type of broadband access. (Users more experienced in networking may choose to select the Ad- vanced button and skip to Section 4.)

•For supplementary tools, use the tabs along the top of the screen.

DSL Button

Select the appropriate connection method.

Automatic IP Assignment by ISP

- The DHCP server of the ISP assigns an IP ad- dress automatically.

16

Image 16

Contents Wireless Cable/DSL Router-G WBR2-G54 Table of Contents Network Settings Table of Contents Introduction AirStation Broadband Router Base Station WBR2-G54AirStation Wireless Network Features Home Networking SOHO/SMB Networking Introduction System RequirementsAirStation WBR2-G54 Package Contents Product ViewsInstallation / Setup About the AirStation CDInstallation / Setup Antenna Installation Setup Overview Setup PreparationIntroduction Standard Settings Open the Setup ScreenDSL Button Enter ISP informationAutomatic IP Assignment by ISP Enter IP Address Manually PPPoE ConnectionCatv Cable Button Line Test Security Simple Security Setup Applications Refer to the on-screen help for Aoss Aoss Additional Aoss Information LAN Settings Wireless SettingsAdvanced Settings Wireless LAN Security Data Encryption Disable to haveAdvanced Settings Characteristics LAN Port Dhcp Server Advanced Settings Manual IP MAC Address Assignment Settings Wireless MAC Filter Wireless PC’s ConnectionRegister for Allowable PC’s MAC Address Wireless Bridge WDS Advanced Settings WAN Settings WAN PortConnection Type Select from MTU Maximum Transmit MRU Maximum ReceiveWAN Network Advanced Settings Routing Setup Network SettingsRIP transmission to WAN Add Routing Table Entry Address Translation Add NAT Table IP address of WAN SelectAdvanced Settings Packet Filter Basic Filter Setting Advanced Settings MAC Filter Click Enter MAC ﬁ lter to enter MAC address Click Apply when settings are complete Setting for Intrusion Detector set Intrusion DetectorIntrusion Detector Select Do not Use , Use or Use Apply Packet ﬁlterPage UPnP Management System InformationAdmin Name Password Time setup NTP server name Enter the NTP server nameWired WAN Wired LAN Wireless LAN Packet Trafﬁc InformationClient Monitor Ping Test Display log info Select Log InformationLog information Displays Syslog Transfer Select Use or Do not useLog Information Level Log Information SelectSave/Restore Settings Reboot/Reload Defaults Click Restart to reboot AirStation Com/wireless Firmware UpdateFirmware ﬁle name Aoss Client Table DisplaysAoss Function Click Enable Manually specify the encrypTemperature & Humidity Power CharacteristicsSpeciﬁcations Additional InformationNetworking Characteristics Radio CharacteristicsRegulatory Information Host Operating SystemOpen Ofﬁce Environment Semi-Open Ofﬁce Environment 2412 Troubleshooting Common ProblemsLED Activity B Diag LED ActivityTable B.1.1 Diag LED Activity Table Changing Client TCP/IP Settings in WindowsLEDs Work But Client PC Cannot Connect to Network Other Problems Cause ProblemRestrictions Proper Setup Click on the ‘LAN port’ link on the left Troubleshooting Troubleshooting Glossary DCE Data Communications EquipmentDsss Direct Sequence Spread Spectrum MHz MegaHertz One million cycles per second PCI Peripheral Component Interconnect a ROM Read Only Memory Permanent memoryGlossary Glossary FCC / CE Information Federal Communication Commission Interference StatementImportant Note Federal Communication Commission Interference StatementFCC RF Radiation Exposure Statement EU Countries intended for useEU Countries Not intended for use Potential restrictive useWarranty Information Contact Information General Inquiries4030 W. Braker Ln. Suite Austin, Texas Tel Fax