Buffalo Technology WBR2-G54 user manual Network Settings, Routing Setup, RIP transmission to WAN

Page 45

Advanced Settings

Routing Setup

Network Settings

Routing Setup

RIP transmission to WAN

-Allows RIP transmission or None (no RIP) to WAN

RIP reception from WAN - Al- lows RIP reception or None (no RIP) from WAN

RIP transmission to LAN - Al- lows RIP transmission or None (no RIP) to LAN

RIP reception from LAN - Al- lows RIP reception or None (no RIP) from LAN

RIP transmission to WAN - Allows RIP transmission or None (no RIP) to WAN

Display current information - Allows administrator to view and delete routing information.

Click Add Route to Add a Routing Table Entry

•Destination address - Network IP address and subnet mask.

45

Image 45

Contents Wireless Cable/DSL Router-G WBR2-G54 Table of Contents Network Settings Table of Contents AirStation Broadband Router Base Station WBR2-G54 IntroductionAirStation Wireless Network Features Home Networking SOHO/SMB Networking System Requirements IntroductionProduct Views AirStation WBR2-G54 Package ContentsAbout the AirStation CD Installation / SetupInstallation / Setup Antenna Installation Setup Preparation Setup OverviewIntroduction Open the Setup Screen Standard SettingsEnter ISP information DSL ButtonAutomatic IP Assignment by ISP PPPoE Connection Enter IP Address ManuallyCatv Cable Button Line Test Security Simple Security Setup Applications Refer to the on-screen help for Aoss Aoss Additional Aoss Information Wireless Settings LAN SettingsAdvanced Settings Data Encryption Disable to have Wireless LAN SecurityAdvanced Settings Characteristics LAN Port Dhcp Server Advanced Settings Manual IP MAC Address Assignment Settings Wireless PC’s Connection Wireless MAC FilterRegister for Allowable PC’s MAC Address Wireless Bridge WDS Advanced Settings WAN Port WAN SettingsConnection Type Select from MRU Maximum Receive MTU Maximum TransmitWAN Network Advanced Settings Network Settings Routing SetupRIP transmission to WAN Add Routing Table Entry Address Translation IP address of WAN Select Add NAT TableAdvanced Settings Packet Filter Basic Filter Setting Advanced Settings MAC Filter Click Enter MAC ﬁ lter to enter MAC address Click Apply when settings are complete Intrusion Detector Setting for Intrusion Detector setIntrusion Detector Select Do not Use , Use or Use Apply Packet ﬁlterPage UPnP System Information ManagementAdmin Name Password NTP server name Enter the NTP server name Time setupPacket Trafﬁc Information Wired WAN Wired LAN Wireless LANClient Monitor Ping Test Log Information Display log info SelectLog information Displays Select Use or Do not use Syslog TransferLog Information Level Log Information SelectSave/Restore Settings Reboot/Reload Defaults Click Restart to reboot AirStation Firmware Update Com/wirelessFirmware ﬁle name Client Table Displays AossManually specify the encryp Aoss Function Click EnablePower Characteristics Temperature & HumiditySpeciﬁcations Additional InformationRadio Characteristics Networking CharacteristicsRegulatory Information Host Operating SystemOpen Ofﬁce Environment Semi-Open Ofﬁce Environment 2412 Common Problems TroubleshootingLED Activity B Diag LED ActivityChanging Client TCP/IP Settings in Windows Table B.1.1 Diag LED Activity TableLEDs Work But Client PC Cannot Connect to Network Other Problems Problem CauseRestrictions Proper Setup Click on the ‘LAN port’ link on the left Troubleshooting Troubleshooting DCE Data Communications Equipment GlossaryDsss Direct Sequence Spread Spectrum MHz MegaHertz One million cycles per second ROM Read Only Memory Permanent memory PCI Peripheral Component Interconnect aGlossary Glossary Federal Communication Commission Interference Statement FCC / CE InformationFederal Communication Commission Interference Statement Important NoteEU Countries intended for use FCC RF Radiation Exposure StatementEU Countries Not intended for use Potential restrictive useWarranty Information General Inquiries Contact Information4030 W. Braker Ln. Suite Austin, Texas Tel Fax