Buffalo Technology WBR2-G54 user manual Firmware Update, Firmware file name, Com/wireless

Page 68

Firmware Update

Advanced Settings

Firmware Update

Firmware file name

-Click Browse to browse to the path and fi lename for the new fi rmware. Click Firmware Update to load fi rmware to the AirStation.

Note: Firmware update does not erase current user settings.

Please visit the Buffalo Technology Web Page to download the latest fi rm- wares free of charge.

http://www.buffalotech.

com/wireless

68

Image 68
Contents Wireless Cable/DSL Router-G WBR2-G54 Table of Contents Network Settings Table of Contents Introduction AirStation Broadband Router Base Station WBR2-G54AirStation Wireless Network Features Home Networking SOHO/SMB Networking Introduction System RequirementsAirStation WBR2-G54 Package Contents Product ViewsInstallation / Setup About the AirStation CDInstallation / Setup Antenna Installation Introduction Setup PreparationSetup Overview Standard Settings Open the Setup ScreenAutomatic IP Assignment by ISP Enter ISP informationDSL Button Enter IP Address Manually PPPoE ConnectionCatv Cable Button Line Test Security Simple Security Setup Applications Refer to the on-screen help for Aoss Aoss Additional Aoss Information LAN Settings Wireless SettingsAdvanced Settings Wireless LAN Security Data Encryption Disable to haveAdvanced Settings Characteristics LAN Port Dhcp Server Advanced Settings Manual IP MAC Address Assignment Settings Wireless MAC Filter Wireless PC’s ConnectionRegister for Allowable PC’s MAC Address Wireless Bridge WDS Advanced Settings WAN Settings WAN PortConnection Type Select from MTU Maximum Transmit MRU Maximum ReceiveWAN Network Advanced Settings RIP transmission to WAN Network SettingsRouting Setup Add Routing Table Entry Address Translation Add NAT Table IP address of WAN SelectAdvanced Settings Packet Filter Basic Filter Setting Advanced Settings MAC Filter Click Enter MAC fi lter to enter MAC address Click Apply when settings are complete Setting for Intrusion Detector set Intrusion DetectorIntrusion Detector Select Do not Use , Use or Use Apply Packet filterPage UPnP Management System InformationAdmin Name Password Time setup NTP server name Enter the NTP server nameWired WAN Wired LAN Wireless LAN Packet Traffic InformationClient Monitor Ping Test Log information Displays Log InformationDisplay log info Select Syslog Transfer Select Use or Do not useLog Information Level Log Information SelectSave/Restore Settings Reboot/Reload Defaults Click Restart to reboot AirStation Firmware file name Firmware UpdateCom/wireless Aoss Client Table DisplaysAoss Function Click Enable Manually specify the encrypTemperature & Humidity Power CharacteristicsSpecifications Additional InformationNetworking Characteristics Radio CharacteristicsRegulatory Information Host Operating SystemOpen Office Environment Semi-Open Office Environment 2412 Troubleshooting Common ProblemsLED Activity B Diag LED ActivityLEDs Work But Client PC Cannot Connect to Network Changing Client TCP/IP Settings in WindowsTable B.1.1 Diag LED Activity Table Other Problems Restrictions ProblemCause Proper Setup Click on the ‘LAN port’ link on the left Troubleshooting Troubleshooting Glossary DCE Data Communications EquipmentDsss Direct Sequence Spread Spectrum MHz MegaHertz One million cycles per second PCI Peripheral Component Interconnect a ROM Read Only Memory Permanent memoryGlossary Glossary FCC / CE Information Federal Communication Commission Interference StatementImportant Note Federal Communication Commission Interference StatementFCC RF Radiation Exposure Statement EU Countries intended for useEU Countries Not intended for use Potential restrictive useWarranty Information Contact Information General Inquiries4030 W. Braker Ln. Suite Austin, Texas Tel Fax