Buffalo Technology WBR2-G54 user manual Line Test

Page 19

Auto IP/

Manual DNS

Settings

Line

Test Tab

Standard Settings

The IP Address is Acquired Automatically but DNS Server Address is Entered Manually

-Select ‘IP address is acquired automatically but DNS server address is entered manually’ if the ISP’s DHCP server supplies an IP address but not DNS server addresses.

Line Test

Tests the connection to the Internet.

19

Image 19

Contents Wireless Cable/DSL Router-G WBR2-G54 Table of Contents Network Settings Table of Contents AirStation Broadband Router Base Station WBR2-G54 IntroductionAirStation Wireless Network Features Home Networking SOHO/SMB Networking System Requirements IntroductionProduct Views AirStation WBR2-G54 Package ContentsAbout the AirStation CD Installation / SetupInstallation / Setup Antenna Installation Setup Overview Setup PreparationIntroduction Open the Setup Screen Standard SettingsDSL Button Enter ISP informationAutomatic IP Assignment by ISP PPPoE Connection Enter IP Address ManuallyCatv Cable Button Line Test Security Simple Security Setup Applications Refer to the on-screen help for Aoss Aoss Additional Aoss Information Wireless Settings LAN SettingsAdvanced Settings Data Encryption Disable to have Wireless LAN SecurityAdvanced Settings Characteristics LAN Port Dhcp Server Advanced Settings Manual IP MAC Address Assignment Settings Wireless PC’s Connection Wireless MAC FilterRegister for Allowable PC’s MAC Address Wireless Bridge WDS Advanced Settings WAN Port WAN SettingsConnection Type Select from MRU Maximum Receive MTU Maximum TransmitWAN Network Advanced Settings Routing Setup Network SettingsRIP transmission to WAN Add Routing Table Entry Address Translation IP address of WAN Select Add NAT TableAdvanced Settings Packet Filter Basic Filter Setting Advanced Settings MAC Filter Click Enter MAC ﬁ lter to enter MAC address Click Apply when settings are complete Use , Use or Use Apply Packet ﬁlter Setting for Intrusion Detector setIntrusion Detector Intrusion Detector Select Do notPage UPnP System Information ManagementAdmin Name Password NTP server name Enter the NTP server name Time setupPacket Trafﬁc Information Wired WAN Wired LAN Wireless LANClient Monitor Ping Test Display log info Select Log InformationLog information Displays Log Information Select Syslog TransferSelect Use or Do not use Log Information LevelSave/Restore Settings Reboot/Reload Defaults Click Restart to reboot AirStation Com/wireless Firmware UpdateFirmware ﬁle name Client Table Displays AossManually specify the encryp Aoss Function Click EnableAdditional Information Temperature & HumidityPower Characteristics SpeciﬁcationsHost Operating System Networking CharacteristicsRadio Characteristics Regulatory InformationOpen Ofﬁce Environment Semi-Open Ofﬁce Environment 2412 Diag LED Activity TroubleshootingCommon Problems LED Activity BTable B.1.1 Diag LED Activity Table Changing Client TCP/IP Settings in WindowsLEDs Work But Client PC Cannot Connect to Network Other Problems Cause ProblemRestrictions Proper Setup Click on the ‘LAN port’ link on the left Troubleshooting Troubleshooting DCE Data Communications Equipment GlossaryDsss Direct Sequence Spread Spectrum MHz MegaHertz One million cycles per second ROM Read Only Memory Permanent memory PCI Peripheral Component Interconnect aGlossary Glossary Federal Communication Commission Interference Statement FCC / CE InformationFederal Communication Commission Interference Statement Important NotePotential restrictive use FCC RF Radiation Exposure StatementEU Countries intended for use EU Countries Not intended for useWarranty Information General Inquiries Contact Information4030 W. Braker Ln. Suite Austin, Texas Tel Fax