Buffalo Technology WBR2-G54 user manual Advanced Settings, Connection Type Select from

Page 41

Advanced Settings

PPPoE Setting (for enabling PPPoE Client function) - Allows administrator to use PPPoE as speciﬁed by the ISP.

The following parameters should be entered for PPPoE Settings: Name of Connection - Enter the name of your connection.

User Name - Enter the user name (up to 64 alphanumeric characters) for PPPoE authorization.

Password - Enter the password provided by your ISP (up to 64 alphanumeric characters). Reenter the password in the Conﬁrmation box.

Service Name - Enter the PPPoE service name (up to 64 alphanumeric characters). If your ISP doesn’t require a service name, then leave it blank.

Connection Type - Select from:

-Continuous Connection - connects immediately after setting and never disconnects.

-Connect on Demand - Reconnects when the disconnect time elapses.

-Manual - Disables Automatic Connection. Connects to the Internet using the connect button on the initial settings page.

The Enter New Connection button will not appear until Use PPPoE Client is set.

Disconnection Time - Specify the number of minutes (0-1440) before automatic disconnect is performed. If “0” is entered, the disconnect function is disabled. If Continuous Connection is selected, the timer is disabled.

41

Image 41

Contents Wireless Cable/DSL Router-G WBR2-G54 Table of Contents Network Settings Table of Contents AirStation Broadband Router Base Station WBR2-G54 IntroductionAirStation Wireless Network Features Home Networking SOHO/SMB Networking System Requirements IntroductionProduct Views AirStation WBR2-G54 Package ContentsAbout the AirStation CD Installation / SetupInstallation / Setup Antenna Installation Introduction Setup PreparationSetup Overview Open the Setup Screen Standard SettingsAutomatic IP Assignment by ISP Enter ISP informationDSL Button PPPoE Connection Enter IP Address ManuallyCatv Cable Button Line Test Security Simple Security Setup Applications Refer to the on-screen help for Aoss Aoss Additional Aoss Information Wireless Settings LAN SettingsAdvanced Settings Data Encryption Disable to have Wireless LAN SecurityAdvanced Settings Characteristics LAN Port Dhcp Server Advanced Settings Manual IP MAC Address Assignment Settings Wireless PC’s Connection Wireless MAC FilterRegister for Allowable PC’s MAC Address Wireless Bridge WDS Advanced Settings WAN Port WAN SettingsConnection Type Select from MRU Maximum Receive MTU Maximum TransmitWAN Network Advanced Settings RIP transmission to WAN Network SettingsRouting Setup Add Routing Table Entry Address Translation IP address of WAN Select Add NAT TableAdvanced Settings Packet Filter Basic Filter Setting Advanced Settings MAC Filter Click Enter MAC ﬁ lter to enter MAC address Click Apply when settings are complete Intrusion Detector Setting for Intrusion Detector setIntrusion Detector Select Do not Use , Use or Use Apply Packet ﬁlterPage UPnP System Information ManagementAdmin Name Password NTP server name Enter the NTP server name Time setupPacket Trafﬁc Information Wired WAN Wired LAN Wireless LANClient Monitor Ping Test Log information Displays Log InformationDisplay log info Select Select Use or Do not use Syslog TransferLog Information Level Log Information SelectSave/Restore Settings Reboot/Reload Defaults Click Restart to reboot AirStation Firmware ﬁle name Firmware UpdateCom/wireless Client Table Displays AossManually specify the encryp Aoss Function Click EnablePower Characteristics Temperature & HumiditySpeciﬁcations Additional InformationRadio Characteristics Networking CharacteristicsRegulatory Information Host Operating SystemOpen Ofﬁce Environment Semi-Open Ofﬁce Environment 2412 Common Problems TroubleshootingLED Activity B Diag LED ActivityLEDs Work But Client PC Cannot Connect to Network Changing Client TCP/IP Settings in WindowsTable B.1.1 Diag LED Activity Table Other Problems Restrictions ProblemCause Proper Setup Click on the ‘LAN port’ link on the left Troubleshooting Troubleshooting DCE Data Communications Equipment GlossaryDsss Direct Sequence Spread Spectrum MHz MegaHertz One million cycles per second ROM Read Only Memory Permanent memory PCI Peripheral Component Interconnect aGlossary Glossary Federal Communication Commission Interference Statement FCC / CE InformationFederal Communication Commission Interference Statement Important NoteEU Countries intended for use FCC RF Radiation Exposure StatementEU Countries Not intended for use Potential restrictive useWarranty Information General Inquiries Contact Information4030 W. Braker Ln. Suite Austin, Texas Tel Fax