Advanced Settings

ZSR4154WE provides some advanced control of wireless parameters, if you want to configure these settings, please click “Wireless” menu on the left of web management interface, then click “Advanced Settings”, and the following message will be displayed on your web browser:

BG Protection Mode: Default mode is Auto. It is for 11b/g wireless client to connect 11n wireless network smoothly in a complicated wireless area.

Basic Data Rates: For different requirement, you can select one of the suitable Basic Data Rates. Default value is (1-2-5.5.-11Mbps…). It is recommended not to modify this value.

Beacon Interval: Set the beacon interval of wireless radio. Default value is 100. It is recommended not to modify this value.

Fragment Threshold: The fragmentation threshold defines the maximum transmission packet size in bytes. The packet will be fragmented if the arrival is bigger than the threshold setting. The default size is 2346 bytes. It is recommended not to modify this value.

RTS Threshold: RTS stands for “Request to Send”. This parameter controls what size data packet the frequency protocol issues to RTS packet. The default value of the attribute is 2346. It is recommended not to modify this value in SOHO environment.

TX Power: Set the output power of wireless radio. The default value is 100.

WMM Capable: It will enhance the data transfer performance of multimedia data when they’re being transferred over wireless network. It is recommended to enable this option.

APSD Capable: It is used for auto power-saved service. The default is disabled.