Zonet Technology ZSR4154WE manual

Page 9

3.Connect your xDSL / cable modem to the WAN port of ZSR4154WE by Ethernet cable.

4.Please check all LEDs on the top panel. POWER LED should be steadily on, WAN and LAN LEDs should be on if the computer / network device connected to the respective port of ZSR4154WE is powered on and correctly connected. If any LED you expected is not on, please recheck the cabling, or jump to “Troubleshooting” for possible reasons and solution.

Image 9

Contents Page Copyright Statement Table of Contents Ddns Introduction Contents of PackageWelcome System Requirements Wlan Getting to Know Your ZSR4154WEReset Hardware Installation Page Connect Your ZSR4154WE How to Set the Network Configurations for My ComputerSelect Internet Protocol TCP/IP and click Properties Page Select Start → Programs → Accessories → Command Prompt How to Check the Network ConnectionHow to Access the Web-based Configuration Utility Basic ConfigurationsSetup Wizard Page Page Page LAN Settings Advanced SettingsWAN Settings Page Page Page MAC Address Clone DNS SettingsBasic Settings Wireless SettingsSecurity Settings Page Page Advanced Settings WPS Settings WDS Settings Access Control Connection Status Dhcp Server Server List & Binding Port Range Forwarding Virtual ServerUPnP Settings DMZ SettingsTraffic Control Example email@123.com URL MonitorPage Client Filter Security SettingsURL Filter Prevent Network Attack MAC FilterWAN Ping Remote Web ManagementRouting Table Routing SettingsSystem Tools Time SettingsFirmware Upgrade Backup/RestoreReboot Restore to Factory Default SettingsSystem Log Change PasswordFeatures Appendix 1 Product Features & SpecificationsLED LAN 1-4/WAN/WLAN/WPS/SYS/POWER SpecificationsAppendix 2 Troubleshooting Page TCP