WDS Mode:
Lazy Mode: You need to configure ZSR4154WE’s BSSID into another device, but don’t need to input another device’s BSSID in ZSR4154WE, and they will connect together automatically.
Bridge Mode: You can wirelessly connect two or more wired networks via this mode. In this mode, you need to add the Wireless MAC address of the connecting device into ZSR4154WE's AP MAC address table or select one from the scanning table. At the same time, the connecting device should be in Lazy, Repeater or Bridge mode.
Repeater Mode: You can select the mode to extend the distance between the two WLAN devices. Functioning as a WDS repeater, ZSR4154WE connects to both a client card as an AP and to another AP. In typical repeater applications, APs connecting to other APs equipped with WDS functionality must also support WDS. In this mode, you need to add the MAC address of the connecting device into ZSR4154WE's AP MAC address table and the connecting client should be in Lazy, Repeater or client mode.
Encrypt Type: You can select from WEP mode, TKIP mode, AES mode for security here.
Pass phrase: Enter the key, the key format according to encryption you selected.
AP MAC: Input the MAC address of another wireless router.
NOTE: Two wireless routers must use the same band, channel number, and security setting.
Access Control
This function will help you to prevent unauthorized users from connecting to ZSR4154WE; only those wireless devices who have the MAC address you assigned here can gain access to your ZSR4154WE. You can use this function with other security measures described in previous section, to create a safer wireless environment.
28