Zonet Technology ZSR4154WE manual Restore to Factory Default Settings, Reboot

Page 48

IMPORTANT: Do not power off the system during the firmware upgrade to avoid damaging. ZSR4154WE will reboot automatically after the upgrade.

Restore to Factory Default Settings

Restore to Factory Default Settings: Click to restore to default settings.

Factory Default Settings:

User Name: admin

Password: admin

IP Address: 192.168.0.1

Subnet Mask: 255.255.255.0

NOTE: After restoring to default settings, please reboot ZSR4154WE so the settings will take effect.

Reboot

Reboot the router: Click to reboot ZSR4154WE.

44

Image 48

Contents Page Copyright Statement Table of Contents Ddns Contents of Package IntroductionWelcome System RequirementsGetting to Know Your ZSR4154WE WlanReset Hardware Installation Page How to Set the Network Configurations for My Computer Connect Your ZSR4154WESelect Internet Protocol TCP/IP and click Properties Page How to Check the Network Connection Select Start → Programs → Accessories → Command PromptBasic Configurations How to Access the Web-based Configuration UtilitySetup Wizard Page Page Page Advanced Settings LAN SettingsWAN Settings Page Page Page DNS Settings MAC Address CloneWireless Settings Basic SettingsSecurity Settings Page Page Advanced Settings WPS Settings WDS Settings Access Control Connection Status Dhcp Server Server List & Binding Virtual Server Port Range ForwardingDMZ Settings UPnP SettingsTraffic Control URL Monitor Example email@123.comPage Security Settings Client FilterURL Filter MAC Filter Prevent Network AttackRemote Web Management WAN PingRouting Settings Routing TableTime Settings System ToolsBackup/Restore Firmware UpgradeRestore to Factory Default Settings RebootChange Password System LogAppendix 1 Product Features & Specifications FeaturesSpecifications LED LAN 1-4/WAN/WLAN/WPS/SYS/POWERAppendix 2 Troubleshooting Page TCP