Zhone Technologies 5620 installation instructions Optional RTU Wall Placement, Procedure

Page 11

Optional RTU Wall Placement

The Hotwire 5620 RTU is designed for tabletop placement. The RTU can also be mounted on a wall. To mount an RTU, you will need:

-Three slotted-head #6 self-threading screws with molly bolts

-Drill and 3/16I drill bit for the molly bolts

-Screwdriver

A template with the dimensions for the three screws is provided. See RTU Hardware Template on page 12.

"Procedure

To mount the RTU:

1.Use a drill to install the plastic anchors (molly bolts).

2.Use a screwdriver to install the screws. Do not install the screws flush with the wall. Leave enough clearance to hang the RTU housing from the screws.

Wall

Fasteners

Hotwire

RTU

98-16170

Image 11

Contents Document Number Document Title Wiring and Cables NeededBefore You Begin DSL Access with a Hotwire 5030 or 5038 Pots Splitter What Does the Hotwire Radsl RTU Do?Package Checklist Customer Premises CP DSL Access with a Hotwire 5038 Distributed Pots SplitterNetwork Service Provider DSL RTU DSL Access without a Pots SplitterPunchdown Block Installing the DSL Access WiringProcedure DSL/POTS Telephone Network Interface Device NIDRJ11 Wall Jack POTS/DSLPots Splitter Installing the Hotwire 5620 RTUHotwire RTU Ethernet Line Ferrite Optional RTU Wall Placement RTU Hardware Template Condition Status Power-OnAlarm red Status LEDsNSP TroubleshootingLED Symptom Action Increasing the Number of End-User SystemsPin # Function Cables & ConnectorsSpecification Model 5620 RTU Technical SpecificationsImportant Safety Instructions Declaration of Conformity Canada EMI Warnings Document Feedback Warranty, Sales, and Service InformationTrademarks