Zhone Technologies 5620 installation instructions Telephone Network Interface Device NID, Dsl/Pots

Page 6

3.Locate the DSL pair of T1/R1 connectors on the customer premises side of the NID or punchdown block. Attach the wiring that will be connected to the DSL jack. In the following example, a NID is used without a POTS splitter. It includes an existing POTS line and a second pair installed for DSL access.

Telephone Network Interface Device (NID)

Customer Premises

Tip

T1

(Green)

Ring

R1

(Red)

Wiring to

DSL Jack

Existing POTS

Wiring to

Telephone

Demarcation Point

DSL Pair

POTS Pair

DSL/POTS

Access from

Local Loop

Ground

97-15438-01

6

Image 6

Contents Wiring and Cables Needed Before You BeginDocument Number Document Title What Does the Hotwire Radsl RTU Do? Package ChecklistDSL Access with a Hotwire 5030 or 5038 Pots Splitter DSL Access with a Hotwire 5038 Distributed Pots Splitter Network Service ProviderCustomer Premises CP DSL Access without a Pots Splitter DSL RTUInstalling the DSL Access Wiring ProcedurePunchdown Block Telephone Network Interface Device NID DSL/POTSPOTS/DSL RJ11 Wall JackInstalling the Hotwire 5620 RTU Hotwire RTUPots Splitter Ethernet Line Ferrite Optional RTU Wall Placement RTU Hardware Template Status LEDs Power-OnAlarm red Condition StatusIncreasing the Number of End-User Systems TroubleshootingLED Symptom Action NSPCables & Connectors Pin # FunctionModel 5620 RTU Technical Specifications SpecificationImportant Safety Instructions Declaration of Conformity Canada EMI Warnings Warranty, Sales, and Service Information TrademarksDocument Feedback