Zhone Technologies 5620 installation instructions Cables & Connectors, Pin # Function

Page 15

Cables & Connectors

Use standard twisted-pair CAT3 or better cables.

This section is reference information.

HThe Ethernet interface connector uses an 8-pin, non-keyed modular plug.

ÐTo connect the RTU to an Ethernet hub, use the straight-through connection.

8-Pin Straight-Through Connection

Pin # Function

110BaseT TX D+

210BaseT TX D±

310BaseT RX D+

4 & 5 Not used

610BaseT RX D±

7 & 8 Not used

Ethernet

Cable

8-Pin

Plug

Pin #8

Pin #1

98-16055a

ÐTo connect the RTU directly to a PC with an Ethernet NIC card, use an Ethernet crossover cable.

8-Pin Ethernet Crossover Cable

Function Pin #

Pin # Function

10BaseT TX D+	1
10BaseT TX D–	2
10BaseT RX D+	3
Not Used	4
Not Used	5
10BaseT RX D–	6
Not Used	7
Not Used	8

110BaseT TX D+

210BaseT TX D–

310BaseT RX D+

4Not Used

5Not Used

610BaseT RX D–

7Not Used

8Not Used

97-15316

15

Image 15

Contents Wiring and Cables Needed Before You BeginDocument Number Document Title What Does the Hotwire Radsl RTU Do? Package ChecklistDSL Access with a Hotwire 5030 or 5038 Pots Splitter DSL Access with a Hotwire 5038 Distributed Pots Splitter Network Service ProviderCustomer Premises CP DSL RTU DSL Access without a Pots SplitterInstalling the DSL Access Wiring ProcedurePunchdown Block DSL/POTS Telephone Network Interface Device NIDRJ11 Wall Jack POTS/DSLInstalling the Hotwire 5620 RTU Hotwire RTUPots Splitter Ethernet Line Ferrite Optional RTU Wall Placement RTU Hardware Template Condition Status Power-OnAlarm red Status LEDsNSP TroubleshootingLED Symptom Action Increasing the Number of End-User SystemsPin # Function Cables & ConnectorsSpecification Model 5620 RTU Technical SpecificationsImportant Safety Instructions Declaration of Conformity Canada EMI Warnings Warranty, Sales, and Service Information TrademarksDocument Feedback