Zonet Technology ZEW1542 manual WPS Configuration

Page 19

802.11n Wireless CardBus

4.7 WPS Configuration

WPS page supports the configuration setup using PIN configuration method or PBC configuration method. WPS(Wi-Fi Protected Setup) is to simplify the security setup and management of Wi-Fi networks.

1.WPS AP List: Display the information of surrounding APs with WPS IE from last scan result, including SSID, BSSID, Channel, ID (Device Password ID), Security-Enabled.

2.Rescan: Update information on surrounding wireless network.

3.Information: Display the information about WPS IE on the selected network, list including Authentication Type, Encryption Type, Config Methods, Device Password ID, Selected Registrar, State, Version, AP Setup Locked, UUID-E and RF Bands

4.PIN Code: 8-digit numbers.

5.Config Mode: Enrollee or external Registrar

6.Detail: Information about Security and Key in the credential.

7.Connect: Connect to the selected network inside credentials.

8.Rotate: Connect to the next network inside credentials.

9.Disconnect: Stop WPS action and disconnect this active link.

16

Image 19
Contents Page Page Table of Contents Welcome Product FeatureContents of Package IntroductionBefore you begin Designing Your ZEW1542Install Your ZEW1542 InstallationInstall Driver and Utility 802.11n Wireless CardBus 802.11n Wireless CardBus Profile Configuration1 Add/Edit Profile 802.11n Wireless CardBus 802.11n Wireless CardBus Link Status Site Survey Statistics Advanced QoS WPS Configuration About Use Zero Configuration 802.11n Wireless CardBus 802.11n Wireless CardBus Advanced page configures firewall and connection sharing Start Soft AP Soft APConfiguration Access Control MAC Table Switch to Working Station modeLED SpecificationsTroubleShooting