Asante Technologies user manual Vlan Specifications for the IntraCore 3500 Series

Page 50

Inserting/Modifying a Port Trusted MAC Address

When you set port security level 2 or 3 for a port, you specify the port-trusted MAC address. You can change that address for a port without completing all the steps to set the port security.

To add or change the port-trusted MAC address:

1.From the Configuration Menu, type t to access the Security Management Menu.

2.Type p to access the Port Security Configuration Menu.

3.Type i, and then follow the instructions on the screen.

Resetting Security to Defaults

To reset the security measures on the switch to the factory defaults, access the Security Management Menu by typing t in the Configuration Menu. Then type r to reset all of the security configurations to the factory-set defaults. These defaults and their meanings are discussed in the sections on each security measure, earlier in this chapter.

4.4 VLAN Management

A virtual LAN, or VLAN, is a logical grouping that allows stations to communicate as if they were physically connected to a single LAN, independent of the actual physical configuration of a network. The IntraCore 3524 supports port-based VLANs, in compliance with the IEEE 802.1Q standard. The following sections describe how to configure and manage VLANs on the switch. For more information on VLANs, see Chapter 7. Switching Concepts.

4.4.1 VLAN Specifications for the IntraCore 3500 Series

The switch supports the following features of the IEEE 802.1Q standard:

•Port-based VLAN management

•Up to 64 manually-configurable VLANs

•Default VLAN

•VLAN creation and deletion

•VLAN port member addition and deletion

•VLAN untagged set addition and deletion

•Configurable VID range: 2 to 4094

•Port VID configurable range: 1 to 4094

•Port ingress filtering

•Port admit frame type

•Independent VLAN learning (IVL)

•Shared VLAN learning (SVL)

•GVRP for dynamic VLAN learning (to be supported; later versions)

•Single STP (Spanning Tree Protocol) spanning multiple VLANs

•SNMP-based VLAN management

Other VLAN Features of the switch

•VLAN management security

•VLAN MAC address insertion and removal

•Console UI management of VLANs

•Web interface management of VLANs

The management operations allowed are:

•Creation

•Deletion

•Name configuration

•VID change configuration

•Adding and deleting port members

50

Image 50

Contents IntraCore 3500 Series Quick Start Guide Gigabit Ethernet Switches User’s Manual IntraCore 3500 SeriesTable of Contents Page Package Contents IntroductionLEDs 1 IC3524 Models2 IC3548-2GT 4810/100Front and Back Panel Descriptions #49Management and Configuration Snmp Management Console InterfaceWeb-Based Interface Safety Overview Hardware Installation and SetupInstallation Overview Power Requirements Installation into an Equipment RackRecommended Installation Tools Environmental RequirementsEquipment Rack Guidelines Installing a GbicGbic Interfaces Removing a Gbic Installing Optional Hardware ModulesConnecting Power Gbic Care and HandlingConnecting to the Network 1 10/100BaseT Ports Cabling ProceduresConnecting to a Console SetupGigabit Ethernet Ports Cabling Procedures Connecting Via Telnet Changing the PasswordConnecting Via the Web Browser IP Assignment Snmp ManagementUsing the Stacking Feature IC3524 only Toggle Stacking Enable/Disable Logging ConfigurationAccessing a Submenu Exiting a Submenu Configuration MenuGeneral Information System Administration Configuration Changing System Administration InfoChanging System IP Information System IP ConfigurationBootstrap Configuration Snmp Configuration Changing Community StringsDeleting a Trap Receiver Enabling Authentication TrapsAdding or Updating a Trap Receiver Port Configuration Basic Port Configuration Menu appearsConfiguring Auto-Negotiation Enabling or Disabling a PortToggling Port Link Speed Configuring a Port ManuallyConfiguring 1000BaseX Ports Toggling Half to Full DuplexEnabling or Disabling 802.3x Flow Control Advanced Port ConfigurationSetting Port Class of Service Setting Port Default Priority Global Port ConfigurationUnicast Forwarding Database Configuration Displaying the Forwarding DatabaseSetting the MAC Address Age-Out Time Searching for a MAC AddressVlan Management Port Mirroring ConfigurationSecurity Management IP Multicast Traffic ManagementImage Downloading through Tftp File Up/Downloading ConfigurationSetting the Monitor Port Serial Downloading Configuration Performing a Software Upgrade at RuntimePerforming a Software Upgrade System Reset ConfigurationResetting the Switch Scheduling a System Reset System LogUser Interface Configuration Clearing the System LogSetting Console Idle Time-out Period Setting Telnet Idle Time-out PeriodEnabling or Disabling the Web Server Changing the PasswordSystem Utility Viewing Statistics Spanning Tree Protocol Configuring Spanning Tree ParametersAdvanced Management Enabling and Disabling STPSpanning Tree Port Configuration Setting Port Priority and Path CostRmon Management Snmp and Rmon ManagementDuplicated IP Detection and Trap Enabling and Disabling Duplicated IP Trap Enabling and Disabling Station Movement TrapEnabling and Disabling Duplicated IP Detection Viewing a List of Duplicated IP AddressesConfiguring Port Security Configuring Port New Node Detection TrapSetting the Intruder Trap Configuring Port Lock and Intruder LockConfiguring Security Level 2 or Level Other Vlan Features of the switch Vlan Specifications for the IntraCore 3500 SeriesResetting Security to Defaults Inserting/Modifying a Port Trusted MAC AddressConfiguring Static Vlan Groups Kkxxxxxx KxxxxxxxAdvanced Static Vlan Configuration Specifying Tagging or No Tagging for a Port Configuring Vlan Port AttributesSetting the Port Vlan ID Displaying a Vlan Port Summary Configuring Port Receive Frame TypeDisplaying a Summary of Vlan Groups Adding and Deleting VLANs from the PortResetting Vlan Configuration to Defaults Multicast AddressesEnabling and Disabling Igmp Snooping Configuring IP Multicast Traffic ManagementIgmp Snooping Displaying a Summary of Group AddressesInserting a Multicast Group Address IP Multicast Forwarding Database ConfigurationAdding Ports to the Selected Address Removing a Multicast Group Address To remove an addressAccessing with a Web Browser Web-Based ManagementFront Panel Button Genl Info General Information ButtonStatistics Button Port Config Port Configuration Button Span Tree Spanning Tree Button Snmp Button Addr Address Table ButtonVlan Button Port Configuration Adding and Deleting Port Members Vlan ConfigurationCreating or Modifying a Vlan Page Security Button Duplicate IP Button Snmp Protocol Snmp ManagementSnmp Management Operations Name Space Path Community Name and SecurityMIB Tree MIB Groups SupportedPage Port-Based VLANs Switching ConceptsVLANs Vlan ID and Tagged FramesSpanning Tree Parameters Port Vlan IDHow It Works Full Duplex Forward DelayFull Duplex, Flow Control and Auto-negotiation Port PriorityFlow Control Auto-NegotiationAppendix A. Troubleshooting Problem Possible SolutionsSpecifications Appendix B. Features and SpecificationsFeatures Environmental Range Physical CharacteristicsTechnical Support and Warranty Standards ComplianceIntraCare Warranty Statement Appendix C. FCC Compliance and Warranty StatementsFCC Compliance Statement Important Safety Instructions Page Pin Number Signal Name Appendix D. Console Port Pin OutsAppendix E. Online Warranty Registration Image Banks Appendix F. BootP ConfigurationBootstrap Configuration Loading Software Locally