Asante Technologies 3500 Series user manual IP Multicast Forwarding Database Configuration

Page 57

+--------------------	+---------	+-----------------------		+
Multicast IP Addr		VID	Action
+--------------------	+---------	+-----------------------		+
xxx.xxx.xxx.xxx		0001	Mgm Action
xxx.xxx.xxx.xxx		0001	Mgm Action
xxx.xxx.xxx.xxx		0001	Mgm Action
xxx.xxx.xxx.xxx		0002	Mgm Action
xxx.xxx.xxx.xxx		0002	Mgm Action
End of Summary,	Quit

4.5.2 IP Multicast Forwarding Database Configuration

The Multicast Forwarding Database lists addresses of multicast groups, and assigns them to specific VLANs. It also lists the ports within a VLAN that can receive traffic from the multicast address.

To access the Multicast FDB Configuration Menu, type c in the Configuration Menu to display the IP Multicast Traffic Management Menu, and then type m. You will see a screen similar to the following:

IntraCore	3524 IP Multicast FDB Configuration Menu	VID: [01]
IP Multicast Address: <none>
Created By: <none>
<Cmd>	<Description>
o	Add/Delete Ports
i	Insert Multicast IP Addr
r	Remove Multicast IP Addr
q	Return to previous menu
Command>
S)elect VLAN N)ext VLAN P)rev VLAN Select A)ddr		Nex)t Addr Prev) Addr

Use the commands at the bottom of the menu to select a VLAN or Multicast Group address.

Adding Ports to the Selected Address

To add or delete ports belonging to the multicast group:

1.Select the VLAN that contains the ports and the address. Type s and enter the VID of your selected VLAN.

2.Select the Multicast Group address. Type a and enter the multicast IP address.

3.Type o and follow the instructions.

Inserting a Multicast Group Address

Inserting an address adds the address to the list of Multicast Groups for the current VLAN. The addresses begin 01:00:5e. The remaining 24 bits are the lowest 24 bits of the IP multicast address.

To insert an address:

1.Select the VLAN to which you will assign the new address. Type s and enter the VID of your selected VLAN.

2.Type i and follow the instructions to add the new address.

Removing a Multicast Group Address To remove an address:

1.Select a VLAN from which you will remove the address. Type s and enter the VID of your selected VLAN.

2.Type r and follow the instructions to remove the address.

57

Image 57

Contents IntraCore 3500 Series Quick Start Guide IntraCore 3500 Series Gigabit Ethernet Switches User’s ManualTable of Contents Page Introduction Package Contents1 IC3524 Models LEDs4810/100 2 IC3548-2GT#49 Front and Back Panel DescriptionsManagement and Configuration Console Interface Web-Based InterfaceSnmp Management Hardware Installation and Setup Installation OverviewSafety Overview Recommended Installation Tools Installation into an Equipment RackPower Requirements Environmental RequirementsInstalling a Gbic Gbic InterfacesEquipment Rack Guidelines Connecting Power Installing Optional Hardware ModulesRemoving a Gbic Gbic Care and Handling1 10/100BaseT Ports Cabling Procedures Connecting to the NetworkSetup Gigabit Ethernet Ports Cabling ProceduresConnecting to a Console Changing the Password Connecting Via the Web BrowserConnecting Via Telnet Snmp Management IP AssignmentUsing the Stacking Feature IC3524 only Toggle Stacking Enable/Disable Configuration Accessing a SubmenuLogging Configuration Menu General InformationExiting a Submenu Changing System Administration Info System Administration ConfigurationSystem IP Configuration Bootstrap ConfigurationChanging System IP Information Changing Community Strings Snmp ConfigurationEnabling Authentication Traps Adding or Updating a Trap ReceiverDeleting a Trap Receiver Basic Port Configuration Menu appears Port ConfigurationEnabling or Disabling a Port Configuring Auto-NegotiationConfiguring 1000BaseX Ports Configuring a Port ManuallyToggling Port Link Speed Toggling Half to Full DuplexAdvanced Port Configuration Setting Port Class of ServiceEnabling or Disabling 802.3x Flow Control Global Port Configuration Setting Port Default PriorityDisplaying the Forwarding Database Unicast Forwarding Database ConfigurationSearching for a MAC Address Setting the MAC Address Age-Out TimeSecurity Management Port Mirroring ConfigurationVlan Management IP Multicast Traffic ManagementFile Up/Downloading Configuration Setting the Monitor PortImage Downloading through Tftp Performing a Software Upgrade at Runtime Serial Downloading ConfigurationSystem Reset Configuration Resetting the SwitchPerforming a Software Upgrade System Log Scheduling a System ResetClearing the System Log User Interface ConfigurationSetting Telnet Idle Time-out Period Setting Console Idle Time-out PeriodChanging the Password System UtilityEnabling or Disabling the Web Server Viewing Statistics Advanced Management Configuring Spanning Tree ParametersSpanning Tree Protocol Enabling and Disabling STPSetting Port Priority and Path Cost Spanning Tree Port ConfigurationSnmp and Rmon Management Duplicated IP Detection and TrapRmon Management Enabling and Disabling Duplicated IP Detection Enabling and Disabling Station Movement TrapEnabling and Disabling Duplicated IP Trap Viewing a List of Duplicated IP AddressesConfiguring Port New Node Detection Trap Configuring Port SecurityConfiguring Port Lock and Intruder Lock Configuring Security Level 2 or LevelSetting the Intruder Trap Resetting Security to Defaults Vlan Specifications for the IntraCore 3500 SeriesOther Vlan Features of the switch Inserting/Modifying a Port Trusted MAC AddressKkxxxxxx Kxxxxxxx Configuring Static Vlan GroupsAdvanced Static Vlan Configuration Configuring Vlan Port Attributes Setting the Port Vlan IDSpecifying Tagging or No Tagging for a Port Displaying a Summary of Vlan Groups Configuring Port Receive Frame TypeDisplaying a Vlan Port Summary Adding and Deleting VLANs from the PortMulticast Addresses Resetting Vlan Configuration to DefaultsIgmp Snooping Configuring IP Multicast Traffic ManagementEnabling and Disabling Igmp Snooping Displaying a Summary of Group AddressesAdding Ports to the Selected Address IP Multicast Forwarding Database ConfigurationInserting a Multicast Group Address Removing a Multicast Group Address To remove an addressWeb-Based Management Accessing with a Web BrowserGenl Info General Information Button Front Panel ButtonStatistics Button Port Config Port Configuration Button Span Tree Spanning Tree Button Addr Address Table Button Snmp ButtonVlan Button Port Configuration Vlan Configuration Creating or Modifying a VlanAdding and Deleting Port Members Page Security Button Duplicate IP Button Snmp Management Snmp Management OperationsSnmp Protocol MIB Tree Community Name and SecurityName Space Path MIB Groups SupportedPage VLANs Switching ConceptsPort-Based VLANs Vlan ID and Tagged FramesPort Vlan ID How It WorksSpanning Tree Parameters Full Duplex, Flow Control and Auto-negotiation Forward DelayFull Duplex Port PriorityAuto-Negotiation Flow ControlProblem Possible Solutions Appendix A. TroubleshootingAppendix B. Features and Specifications FeaturesSpecifications Technical Support and Warranty Physical CharacteristicsEnvironmental Range Standards ComplianceAppendix C. FCC Compliance and Warranty Statements FCC Compliance Statement Important Safety InstructionsIntraCare Warranty Statement Page Appendix D. Console Port Pin Outs Pin Number Signal NameAppendix E. Online Warranty Registration Bootstrap Configuration Appendix F. BootP ConfigurationImage Banks Loading Software Locally