![](/images/new-backgrounds/1179710/179710129x1.webp)
port attributes page to access the VLAN Groups page. In the VLAN Groups page, there is a panel that shows the VID of each VLAN on the current switch.
To configure a VLAN, select the VID of the desired VLAN. To configure the ports for the selected VLAN, click the Ports button.
5.8.1 Port Configuration
Clicking the Ports button in the VLAN Groups page opens the VLAN Port Selection page, as shown below.
The page shows the ports of the unit. There is also a panel indicating the current Port VLAN ID and its settings.
To see and modify the settings for a port, click on the connector for it in the unit simulation. Then make the appropriate settings in the
65