2 Installation and Setup
This chapter explains how to install and connect the switch to your network. To configure the switch for management, refer to the User’s Manual on the
The following guidelines will help you prepare to install the switch in such a way that it has the proper power supply and environment.
2.1 Safety Overview
The following information provides safety guidelines to ensure your safety and to protect the switch from damage.
Note: Be aware, however, that this information is intended as a guideline, and may not include every possible hazard to which you may be exposed. Use caution when installing this switch.
•Only trained and qualified personnel should be allowed to in- stall or replace this equipment.
•Always use caution when lifting heavy equipment
•Keep the chassis clean
•Keep tools and chassis components off the floor and away from foot traffic
•Avoid wearing rings or chains (or other jewelry) that could get caught in the chassis. Metal objects can heat up and cause serious injury to persons and damage to the equipment. Avoid wearing loose clothing, i.e. ties or sleeves
When working with electricity, follow these guidelines:
•Before accessing the interior of the chassis, locate
the emergency
•Disconnect all external cables before installing or removing a chassis
•Do not work alone when working with electricity
•Always check that the power has been disconnected from the circuit
Asanté IntraCore 3500 Series | 13 |
|