Failure to observe these limits may cause damage to the switch and void the warranty.
Avoid direct sunlight, heat sources, or areas with high levels of electromagnetic interference.
2.5 Cooling and Airflow
The switch uses internal fans for air cooling. Do not restrict air flow by covering or obstructing air vents on the sides of the switch.
2.6 Installation Overview
Follow these steps to install the switch:
1.Open the box and check the contents. See Chapter 1.1 Package Contents for a complete list of the items included with your purchase.
2.Install the IntraCore switch chassis in an equipment rack or wall rack, or prepare it for desktop placement.
3.Connect the power supply.
4.Connect network devices to the switch.
5.Refer to the user’s manual on the
2.7 Chassis Installation/Placement
The switch can be installed in a standard
Note: The equipment rack or desk on which you install the switch must be secure and stable. Equipment racks must be fastened to the floor; desks must be resting on a flat, stable surface. Refer to Chapter 2.4 for the environmental requirements of the switch.
2.7.1 Installation in an Equipment Rack
To install the unit in an equipment rack, use the following procedure:
Important! Before continuing, disconnect all cables from the switch.
Asanté IntraCore 3500 Series | 15 |
|