Motorola BLE100 operation manual Special Symbols That Might Appear on the Equipment

Page 2

Caution

These servicing instructions are for use by qualified personnel only. To reduce the risk of electrical shock, do not perform any servicing other than that contained in the Installation and Troubleshooting Instructions unless you are qualified to do so. Refer all servicing to qualified service personnel.

Special Symbols That Might Appear on the Equipment

This symbol indicates that dangerous voltage levels are present within the equipment. These voltages are not insulated and may be of sufficient strength to cause serious bodily injury when touched. The symbol may also appear on schematics.

The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important installation, servicing, and operating instructions in the documents accompanying the equipment.

For continued protection against fire, replace all fuses only with fuses having the same electrical ratings marked at the location of the fuse.

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Installation Manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. Any changes or modifications not expressly approved by Motorola could void the user’s authority to operate this equipment under the rules and regulations of the FCC.

Canadian Compliance

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respects toutes les exigences du Règlement sur le matériel brouilleur du Canada.

 

 

Declaration of Conformity

 

 

We

 

Motorola, Inc.

 

 

 

 

101 Tournament Drive

 

 

 

 

Horsham, PA 19044, U.S.A.

 

declare under our sole responsibility that the

 

 

 

STARLINE®

 

Model BLE100

 

 

to which this declaration relates is in conformity with one or more of the following standards:

 

EMC Standards

 

 

 

 

EN55022

EN55024

EN50083-2

CISPR-22

CISPR-24

Safety Standards

 

 

 

 

EN60065

EN60825

EN60950

IEC 60950 + A1: 1992 + A2: 1993 + A3: 1995 + A4: 1996

following the provisions of the Directive(s) of the Council of the European Union:

 

 

EMC Directive 89/336/EEC

 

Low Voltage Directive 73/23/EEC

 

 

 

 

 

 

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Installation BLE100 Special Symbols That Might Appear on the Equipment Page Contents Specifications Bench TestingInstallation Operating TipsAppendix B Torque Specifications Abbreviations and AcronymsTables Introduction BLE100 closedBLE100 open BLEDocument Conventions Using This ManualRelated Documentation If You Need Help Motorola Online http//businessonline.motorola.comCalling for Repairs Overview BLE100 base with electronics moduleOrdering Matrix BLE100 ordering matrixHousing BLE-HSG/15 housing and dimensionsHousing gaskets GasketsHousing ports Port LocationsPower Supply BLE100 power supplyReturn Path BLE100 block diagramForward Path BLE100 options and accessories Ingress Control SwitchOptions and Accessories Model Description FunctionSCS SFE-100SRE RCB JXP Bench Setup Amplifier SetupProper Handling Procedures Field PracticeForward Path Alignment Before You BeginStarline Cable Equalizers ExampleStarline Forward Equalizers SFE-100 Slope SFE-100Equalizer slope versus cable Starline Cable Simulators Starline Cable SimulatorsFrequency Cable slope in dB Frequency versus cable slope Input and Midstage PadsFlatness Control LDR/9/1G component layout top-left, bottom-right Directional Coupler Test PointsBode Equalization Amplifier Level Control Temperature Gain ReserveGain reserve versus ambient temperature Manual Gain ControlAmplifier Setup Automatic Drive Unit/QAM Automatic Drive Unit Return Path Alignment ADU/QADU Pads and LevelsAlignment Procedure Powering and Surge Protection Bench Testing Before You BeginTest equipment connections for bench sweeping Test Equipment and ConnectionsMeasuring Forward Gain Example Testing Return Gain and Response Completing the Test ProceduresCenter-conductor pin length InstallationAerial Installation J1 position Description Torque sequencePedestal Installation Operating Tips Using Amplifiers in Lower Frequency SystemsUsing Amplifiers in Lower Gain Systems Model BLE100S SpecificationsSpecification Forward AmplifierADU Automatic Drive Unit AC CurrentReturn Amplifier Size Torque SpecificationsTorque Fastener Screw Wrench In-lbs Abbreviations and Acronyms Visit our website at 527548-001 04/06

BLE100 specifications

The Motorola BLE100 is an innovative device designed for efficiency and reliability in the realm of Bluetooth Low Energy (BLE) technology. As a compact and multifunctional solution, it caters to diverse applications, from cost-effective asset tracking to improving smart home environments. The BLE100 stands out for its practicality, making it ideal for both personal and commercial use.

One of the standout features of the Motorola BLE100 is its low power consumption. Leveraging Bluetooth Low Energy technology, the device can operate for extended periods without frequent battery replacements—ideal for remote monitoring applications where long-lasting performance is crucial. This characteristic ensures that users can rely on the BLE100 for day-to-day operations without the hassle of constant recharging.

In terms of connectivity, the BLE100 boasts seamless and stable connections over considerable distances. With a range of up to 100 meters in open environments, the device excels in maintaining reliable communication even in challenging conditions. Its compatibility with a wide array of Bluetooth-enabled devices ensures versatile usability, allowing users to integrate the BLE100 into existing systems with ease.

The Motorola BLE100 also prioritizes user-friendly design. The device is lightweight and compact, ensuring ease of installation and portability. Its robust build makes it resilient against environmental factors, while its sleek design enhances its aesthetic appeal. Moreover, straightforward setup processes and user interfaces facilitate quick deployment for various applications.

Another notable characteristic of the BLE100 is its advanced security features. With built-in encryption and pairing mechanisms, users can safeguard their data and communication. This is particularly vital in applications requiring confidential or sensitive information transfer.

The device supports various protocols and adheres to international standards, which ensures versatility and compatibility in multiple applications. Whether it's intelligent home systems seeking efficient device interaction or logistics needing simple asset tracking solutions, the Motorola BLE100 meets diverse needs.

In conclusion, the Motorola BLE100 is a powerful device that marries efficiency, functionality, and security. Its low power usage, reliable connectivity, user-friendly design, and robust features make it a top choice for anyone looking to enhance their Bluetooth Low Energy applications. With the BLE100, users can explore a wide range of possibilities, from smart technology integration to simplified monitoring solutions, all designed to optimize performance while maintaining a user-centric approach.
Top Page Image Contents