Motorola operation manual Specifications, Model BLE100S, Forward Amplifier

Page 44

Appendix A

Specifications

Specifications are valid over the given passband and operating temperature range of −40°F to +140°F (−40°C to +60°C). Specifications stated are worst case unless otherwise noted, and are subject to change. Refer to the Motorola CHS web site or contact your account representative for the latest specifications.

Model BLE100S

Specification

Passband (S-split)

Gain

Full

Operational

Flatness

52 through 1003 MHz Level control, automatic Gain control

Performance - reference frequency (MHz)

at typical output (dBmV) Channels

Crossmod

CTB

CSO

Noise figure

at 52 MHz

at 1003 MHz

Interstage equalizer, LDR/9/1G Hum modulation

Return loss, input/output

Test points, input/output

Housing dimensions

Weight

Forward Amplifier

52 through 1003 MHz

38 dB (with SFE-100-*)

34 dB (with SFE-100-* and slope reserves)

±0.70 dB maximum

Bode board using ADU/QADU

Fixed pads, JXP-B

1003/550/52

45/44/37

79 analog/320 MHz digital (suppressed by 6 dB)

–70 dB

–76 dB

–71 dB

8 dB (with SFE-1) maximum

8 dB (with SFE-1) maximum

9 ±1 dB

–65 dB

16 dB minimum at operational level

20 ±1.0 dB

10.6L 8.0 W4.7 D inches (26.9 20.3 11.9 cm)

7.2pounds (3.2 kg)

BLE100 Installation and Operation Manual

Image 44
Contents Installation BLE100 Special Symbols That Might Appear on the Equipment Page Contents Bench Testing InstallationSpecifications Operating TipsAppendix B Torque Specifications Abbreviations and AcronymsTables Introduction BLE100 closedBLE100 open BLEDocument Conventions Using This ManualRelated Documentation If You Need Help Motorola Online http//businessonline.motorola.comCalling for Repairs Overview BLE100 base with electronics moduleOrdering Matrix BLE100 ordering matrixHousing BLE-HSG/15 housing and dimensionsHousing gaskets GasketsHousing ports Port LocationsPower Supply BLE100 power supplyReturn Path BLE100 block diagramForward Path Ingress Control Switch Options and AccessoriesBLE100 options and accessories Model Description FunctionSCS SFE-100SRE RCB JXP Amplifier Setup Proper Handling ProceduresBench Setup Field PracticeForward Path Alignment Before You BeginStarline Cable Equalizers ExampleStarline Forward Equalizers SFE-100 Slope SFE-100Equalizer slope versus cable Starline Cable Simulators Starline Cable SimulatorsFrequency Cable slope in dB Frequency versus cable slope Input and Midstage PadsFlatness Control LDR/9/1G component layout top-left, bottom-right Directional Coupler Test PointsBode Equalization Temperature Gain Reserve Gain reserve versus ambient temperatureAmplifier Level Control Manual Gain ControlAmplifier Setup Automatic Drive Unit/QAM Automatic Drive Unit Return Path Alignment ADU/QADU Pads and LevelsAlignment Procedure Powering and Surge Protection Bench Testing Before You BeginTest equipment connections for bench sweeping Test Equipment and ConnectionsMeasuring Forward Gain Example Testing Return Gain and Response Completing the Test ProceduresCenter-conductor pin length InstallationAerial Installation J1 position Description Torque sequencePedestal Installation Operating Tips Using Amplifiers in Lower Frequency SystemsUsing Amplifiers in Lower Gain Systems Specifications SpecificationModel BLE100S Forward AmplifierADU Automatic Drive Unit AC CurrentReturn Amplifier Size Torque SpecificationsTorque Fastener Screw Wrench In-lbs Abbreviations and Acronyms Visit our website at 527548-001 04/06

BLE100 specifications

The Motorola BLE100 is an innovative device designed for efficiency and reliability in the realm of Bluetooth Low Energy (BLE) technology. As a compact and multifunctional solution, it caters to diverse applications, from cost-effective asset tracking to improving smart home environments. The BLE100 stands out for its practicality, making it ideal for both personal and commercial use.

One of the standout features of the Motorola BLE100 is its low power consumption. Leveraging Bluetooth Low Energy technology, the device can operate for extended periods without frequent battery replacements—ideal for remote monitoring applications where long-lasting performance is crucial. This characteristic ensures that users can rely on the BLE100 for day-to-day operations without the hassle of constant recharging.

In terms of connectivity, the BLE100 boasts seamless and stable connections over considerable distances. With a range of up to 100 meters in open environments, the device excels in maintaining reliable communication even in challenging conditions. Its compatibility with a wide array of Bluetooth-enabled devices ensures versatile usability, allowing users to integrate the BLE100 into existing systems with ease.

The Motorola BLE100 also prioritizes user-friendly design. The device is lightweight and compact, ensuring ease of installation and portability. Its robust build makes it resilient against environmental factors, while its sleek design enhances its aesthetic appeal. Moreover, straightforward setup processes and user interfaces facilitate quick deployment for various applications.

Another notable characteristic of the BLE100 is its advanced security features. With built-in encryption and pairing mechanisms, users can safeguard their data and communication. This is particularly vital in applications requiring confidential or sensitive information transfer.

The device supports various protocols and adheres to international standards, which ensures versatility and compatibility in multiple applications. Whether it's intelligent home systems seeking efficient device interaction or logistics needing simple asset tracking solutions, the Motorola BLE100 meets diverse needs.

In conclusion, the Motorola BLE100 is a powerful device that marries efficiency, functionality, and security. Its low power usage, reliable connectivity, user-friendly design, and robust features make it a top choice for anyone looking to enhance their Bluetooth Low Energy applications. With the BLE100, users can explore a wide range of possibilities, from smart technology integration to simplified monitoring solutions, all designed to optimize performance while maintaining a user-centric approach.