Ericsson HM121di manual Verifying your Adsl Connection, Using the Adsl Modem icon, Physical Link

Page 22

Verifying your ADSL Connection

4 Verifying your ADSL Connection

When the installation procedure has been completed, you can use the Control Panel to view the current modem status regarding performance and ADSL connection.

4.1Using the ADSL Modem icon

During driver installation, an ADSL Modem monitoring program is also installed on your system. Whenever you start Windows, the utility is launched automatically with its icon loaded in your system tray to indicate whether the physical connection between your USB modem and the ISP is up or down:

If the ADSL Modem icon does not appear in your system tray, you can manually start the utility by double-clicking the ADSL Modem HM121dp/di icon in the Control Panel. This opens the Modem Control Panel and launches the utility icon at the same time.

The ADSL Modem icon consists of two arrows. The upward arrow indicates data is being transmitted whereas the downward arrow indicates data is being received. The arrows are flashing yellow alternatively to indicate that trianing is in progress.

To identify the connection status, you can also move the cursor over the icon to see the pop-up text as the following examples:

The physical link over the ADSL line is essential before you make a connection to your ISP or corporate networks. If your ADSL connection fails, contact your ISP or system administrator for troubleshooting.

4.2Using the Modem Control Panel

When your ADSL session is active, you can view specific information on your ADSL link. Double-click on the ADSL Modem icon (two arrows) in the system tray to open the Control Panel.

The Modem Control Panel consists of three tabs as described in the following sections.

4.2.1Physical Link

The "Physical Link" tab of the Control Panel views the current state of the modem and the ADSL connection, as shown in the example below. When this window is open, the information is updated every 2 seconds.

22 (47)

EN/LZT 108 6429 R1

May 2003

Image 22
Contents Page Adsl Modem HM121dp/di User Guide Contents Glossary About this Guide IntroductionAbout Adsl About the Adsl Modem HM121dp/di Protocol and Device Driver SelectionPackage Contents LED Indicators System RequirementsDriver Installation Installation ProcedureBefore You Start Installation Procedure Next Installation Procedure Installation Procedure Installation Procedure Connect the Modem Important Notes on attaching other USB DevicesInstallation Program Group Accessing the Internet Using LAN DriverWindows Windows 98, 98SE and MEWindows XP Using WAN Driver Windows Windows XP Verifying your Adsl Connection Using the Adsl Modem iconUsing the Modem Control Panel Physical LinkSystem Information Control Panel Physical Link tabConfiguration Control Panel System Info tabVerifying your Adsl Connection Customizing Communication Settings Communication Settings window appearsCustomizing Communication Settings Uninstalling and Updating Modem Software Software UninstallUninstalling and Updating Modem Software Updating Modem Software Uninstalling and Updating Modem Software Modem is not Detected by Your System TroubleshootingUSB Cable Connected First Checking Modem StatusFlashing Transmitting or receiving data Off No data traffic Licence Agreement Product Care and MaintenanceImportant Information LicenceTerm Limited WarrantyIntended Use Limitation of Liability Governing LawRegulatory Information EuropeImportant Information 2 USA UL Required Information Important Information Important Information Environmental Information HM121dp/di is intended for indoor public and private use Downstream GlossaryDevice FirmwareIP address PasswordLite T1.413User name VPI and VCI