Ericsson HM121dp, HM121di manual Using WAN Driver

Accessing the Internet

3Click the Properties button.

4Select Internet Protocol (TCP/IP) and click the Properties button.

5Select "Use the following IP address" and enter the IP settings provided by your ISP/service provider. Click OK.

6Click Close in the "Local Area Connection Properties" dialog box and in the "Local Area Connection Status" dialog box.

7Close the "Network and Internet Connections" window.

You are now ready to access the Internet, by using a web browser.

3.2Using WAN Driver

The WAN driver causes the modem to reassemble a dial-up modem and connection establishment is performed through Dial-Up Networking.

The WAN driver also includes support for PPPoE (Point-to-Point Protocol over Ethernet).

Follow the steps below to make a dial-up connection to access the Internet.

Note:

You have to use this method every time you want to access the Internet.

3.2.1In Windows 98, 98SE and ME

1Double-click on the shortcut icon HM121dp/di Dial-up PPP Connection on your PCs desktop to open the "Connect To" window. Now, proceed to step 5.

If you do not have the shortcut icon on your desktop, proceed to step 2.

2Double-click on the icon My Computer on your PCs desktop to open the window "My Computer".

3Double-click the Dial-Up Networking icon to open the "Dial-Up Networking" window.

4Double-click the dial-up icon for HM121dp/di DSL Modem to open the "Connect To" window.

5Enter your "User name" and "Password" provided by your ISP/service provider. You may check the "Save password" box to have the system remember your credentials for future use. Then click the Connect button.

DO NOT change the values in the "Phone number" box which indicates the VPI/VCI values for establishing an ADSL connection

May 2003