Ericsson HM121di, HM121dp manual System Requirements, LED Indicators

Introduction

Note:

Your package may also include other materials provided by your ADSL operator.

1.5System Requirements

In order to successfully connect and install the HM121dp/di to your PC, please check the following requirements with your equipment:

∙Pentium II 233 MHz or above

∙At least 32 MB RAM (64 MB recommended)

∙Microsoft Windows 98/98SE/Me/2000/XP. For Windows 98/98SE the Windows Installation CD may be required.

∙20 MB of free hard disk space.

∙CD-ROM drive.

∙One available USB port.

1.6LED Indicators

There are three LED (Light Emitting Diodes) indicators located on top of the modem which indicate the ADSL connection status. These LEDs indicate the current state of the modem, and a description is provided in the table below:

LED	Status	Description
USB	On	Power On
	Off	Power off or Suspend mode
ADSL	Flashing	ADSL line is "training" to achieve the optimum transmission rate.
	Solid	ADSL link is established and ready for use.
	Off	No signal.
DATA	Flashing	Transmitting or receiving data
	Off	No data traffic

8 (47) EN/LZT 108 6429 R1

May 2003