Installation Procedure
2 Installation Procedure
The
The installation procedure is divided into two steps:
∙Driver installation;
Installation of driver and, if required, user parameter input.
∙Connect the modem;
The physical cable connections.
2.1Before You Start
Prior to installing the driver, consult with your ISP or system administrator about the connection type and collect related information. You will be prompted for these information during installation.
Connection Type | Encapsulation and Multiplexing method | Network Information | |
|
|
| |
LAN | RFC 1577 Classical IPoATM | TCP/IP information: | |
| RFC 1483 IPoATM Bridged LLC Encapsulation | - IP address | |
| RFC 1483 | IPoATM Bridged VC Encapsulation | - Subnet mask |
| RFC 1483 IPoATM Routed LLC Encapsulation | - DNS | |
| RFC 1483 | IPoATM Routed VC Encapsulation | - Gateway |
|
|
|
|
WAN | RFC 2364 | PPPoATM LLC Encapsulation | Internet Account information: |
| RFC 2364 PPPoATM NULL Encapsulation | - User name | |
| RFC 2516 | PPPoE Encapsulation | - Password |
|
|
|
|
In addition you need the following information:
∙Modulation (Transmission Standards): T1.413, Multimode, G.Lite or G.DMT
∙The values of VPI and VCI
2.2Driver Installation
Note:
DO NOT connect any cables yet. You will be notified when to connect the modem during the installation process.
1Close ALL Windows applications and insert the Installatioin CD into your
EN/LZT 108 6429 R1 | 9 (47) |
May 2003